Xilinx IBERT ML628 Getting Started Manual page 40

Creating the GTH IBERT Core
X-Ref Target - Figure 1-40
10. Enter the information shown here and in
X-Ref Target - Figure 1-41
40
Figure 1-40: CORE Generator - IBERT GTH Customization - Page 1
• Protocol: OTU4
• Refclk (MHz): 174.69
• GTH count: 4
Figure 1-41: CORE Generator - IBERT GTH Customization - Page 2
www.xilinx.com
Figure 1-41, then click Next:
ML628 IBERT Getting Started Guide
UG806 (v1.0) May 20, 2011
UG806_c1_40_050411
UG806_c1_41_050411