Xilinx IBERT ML628 Getting Started Manual page 17

Hide thumbs Also See for IBERT ML628:

Table of Contents

X-Ref Target - Figure 1-15

Open Cable Button

X-Ref Target - Figure 1-16

ML628 IBERT Getting Started Guide

UG806 (v1.0) May 20, 2011

Figure 1-15: Open Cable Button

When the dialog appears asking to set up the core with the settings from the current

project, click Yes

(Figure

Note:

Restarting the SuperClock-2 module is not required. The Si5268 clock outputs will be

enabled and running at the correct frequency.

Figure 1-16: IBERT V6GTH Project Settings

www.xilinx.com

Running the GTH IBERT Demonstration

1-16).

UG806_c1_15_041411

ug806_c1_16_041411

Table of Contents