Closing The Ibert Demonstration - Xilinx IBERT ML628 Getting Started Manual

X-Ref Target - Figure 1-35
Additional information on the ChipScope Pro software and IBERT core can be found in:
•
•

Closing the IBERT Demonstration

To stop the IBERT demonstration:
1.
ML628 IBERT Getting Started Guide
UG806 (v1.0) May 20, 2011
Figure 1-35: GTX IBERT Console
www.xilinx.com/support/documentation/sw_manuals/xilinx13_1/
chipscope_pro_sw_cores_ug029.pdf, UG029 - ChipScope Pro Software Cores
http://www.xilinx.com/support/documentation/ip_documentation/
chipscope_ibert_virtex6_gth.pdf, DS755 - ChipScope Integrated Bit Error Ratio Test
(IBERT) for Virtex-6 GTH.
Close the ChipScope application by selecting File → Exit.
Note:
Do not save changes to the project.
www.xilinx.com
Running the GTX IBERT Demonstration
ug806_c1_35_041411
29