Xilinx IBERT ML628 Getting Started Manual page 41

11. Enter the information shown here and in
X-Ref Target - Figure 1-42
12. Enter the information shown here and in
X-Ref Target - Figure 1-43
ML628 IBERT Getting Started Guide
UG806 (v1.0) May 20, 2011
• Select Protocol for Quad117: OTU4 / 11.18 Gps
Figure 1-42: CORE Generator - IBERT GTH Customization - Page 3
• Quad_117: MGTREFCLK 117
Figure 1-43: CORE Generator - IBERT GTH Customization - Page 4
www.xilinx.com
Creating the GTH IBERT Core
Figure 1-42, then click Next:
Figure 1-43, then click Next:
UG806_c1_42_050411
UG806_c1_43_050411
41