Xerox Versant 2100 User Manual page 284

Standard Finisher Plus
5. Return the opened lever (2f) or (2e) to its original position, and close the output tray
(2d).
6. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Paper Jams at 2d and Lever 2g
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Pull out the folder output tray (2d), swing lever the 2g, and remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the opened lever (2g) to its original position, and close the output tray (2d).
18-24
® ®
Xerox Versant 2100 Press
User Guide