Squarefold ® Trimmer Module; Standard Finisher Plus - Xerox Versant 2100 User Manual

Product Overview
Note
The Booklet Maker Finisher is shown here with the required Interface Module to the left
and the optional C / Z Folder and GBC finisher to the right.
®
SquareFold Trimmer Module
The SquareFold Trimmer Module is an optional finishing device that is used in conjunction
with a finishing device that contains a booklet maker (with or without the C / Z Folder).
The SquareFold Trimmer Module flattens the spine of the booklet and trims the face of
the booklet.
Note
The SquareFold Trimmer Module is shown here with the required Interface Module and
the required Booklet Maker Finisher.

Standard Finisher Plus

The Standard Finisher Plus includes the same features and functions as the Standard
Finisher but also serves as an interface to transfer paper between the print engine and
any third-party, Document Finishing Architecture (DFA) device attached to the press.
Note
The Standard Finisher Plus requires the Interface Module.
® ®
Xerox Versant 2100 Press 1-13
User Guide