Table of Contents
Advertisement
• Alignment Setting
• Language
• Units
4. Make the desired changes to that feature.
For information on each feature, refer to
5. Exit the menu by pressing either the Up or Down button, and selecting Exit.
Changing Die Sets in the AdvancedPunch Pro (Removing /
Installing)
Note
For detailed information on die set configuration, refer to
Please note that when using a new die some oil will be present around the punched
holes on the sheet. After punching 25 to 50 sheets the die will no longer leave oil on the
sheets. It is recommended that a short test print job be run after installing a new die or
a die that has recently been oiled.
1. Ensure that the press is in standby mode and is not in the process of running any
copy, scan, or print jobs.
2. Open the AdvancedPunch Pro Front Door.
3. Securely grasp the handle of the die set and rotate it in the clockwise direction, as
indicated on the label near the die set lock handle.
This releases the die set from the locked position.
®
®
Xerox
Versant
2100 Press
User Guide
GBC AdvancedPunch Pro
Settings on the User Display
Die Set
Configuration.
Panel.
14-15
Advertisement
Table of Contents
