Xerox Versant 2100 User Manual page 279

3. Move the lever 3e and turn the knob 3c; remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the lever 3e its original position.
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Paper Jams at Lever 3g and Knob 3f
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Move the lever 3g and turn the knob 3f and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
® ®
Xerox Versant 2100 Press
User Guide
Standard Finisher Plus
18-19