Xerox Versant 2100 User Manual page 240

Standard Finisher / Booklet Maker Finisher
2. Remove jammed paper from the finisher stacker tray.
Note
If paper is torn, check inside the machine and remove it.
3. Open and close the finisher right cover.
Note
The machine will not operate if the cover is open even slightly.
Paper Jams at the Booklet Maker Tray
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Turn knob 4a and remove any jammed paper from the optional booklet maker tray.
Note
If paper is torn, check inside the machine and remove it.
4. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
16-28
® ®
Xerox Versant 2100 Press
User Guide