Table of Contents
Advertisement
Standard Finisher Plus
2. Open the right cover on the finisher.
3. Move the levers 3b and 3d; remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the levers 3b and 3d to their original positions.
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Paper Jams at Lever 3e and Knob 3c
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
18-18
®
®
Xerox
Versant
2100 Press
User Guide
Advertisement
Table of Contents
