Table of Contents
Advertisement
5. At the far right of the press, locate the 5a lever and 5b knob. Pull down on the 5a
lever to access the inverter area and remove any paper. Rotate the 5b knob clockwise
to advance any paper coming down into the inverter.
6. It is now safe to unlock and pull out the Exit Module Drawer. Grasp the green Drawer
handle (4) and rotate handle to the right to the horizontal position. Slowly pull out
the Drawer assembly until it stops.
7. Rotate the 4a knob clockwise and advance paper to remove.
8. Lift 4b, 4c, and 4d levers to remove any paper and return the levers in their original
positions.
9. Grasp the green Drawer handle (4) and gently push in the Exit Drawer assembly
completely. Rotate the handle to the left to lock the drawer in place.
10. Close the Front Right Door completely. The press will not operate if a door is open
even slightly.
®
®
Xerox
Versant
2100 Press
User Guide
Problem Solving
10-33
Advertisement
Table of Contents
