Xerox Versant 2100 User Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Office Equipment
  5. Versant 2100
  6. User manual

Xerox Versant 2100 User Manual

Press
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
System Software Version 100.21.44
Book Version 3.0
September 2015
702P02815
®
®
Xerox
Versant
2100 Press
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Xerox Versant 2100

Summary of Contents for Xerox Versant 2100

  • Page 1 System Software Version 100.21.44 Book Version 3.0 September 2015 702P02815 ® ® Xerox Versant 2100 Press User Guide...
  • Page 2 ® ® ® ©2015 Xerox Corporation. All rights reserved. Xerox , Xerox and Design , FreeFlow ® ® ® SquareFold , CentreWare and Versant are trademarks of Xerox Corporation in the United States and/or other countries. ® ® ® Adobe is a registered trademarks of Adobe Systems, Inc.

  • Page 3: Table Of Contents

    Pro..............1-11 ® ™ High Capacity Stacker................1-12 Standard Finisher...................1-12 Booklet Maker Finisher.................1-12 SquareFold Trimmer Module............1-13 ® Standard Finisher Plus................1-13 Third-Party Finishing Devices............1-14 2 Where to Find Help...................2-1 Help on the Xerox Web Site.....................2-1 ® ® Xerox Versant 2100 Press User Guide...
  • Page 4 Skew Adjustment Levers (Trays 8 and 9)............4-17 Loading Paper in the OHCF (Trays 8 and 9)..........4-18 Loading Tabs in the OHCF (Trays 8 and 9)..........4-18 Loading Transparencies in the OHCF (Trays 8 and 9)......4-19 ® ® Xerox Versant 2100 Press User Guide...
  • Page 5 Clean Fuser Assembly Information................8-2 9 Maintenance....................9-1 Maintenance Overview......................9-1 Cleaning the Press ......................9-1 Cleaning the Exterior....................9-2 Clean Fuser Assembly...................9-2 Cleaning the Drum Drawer Area..............9-3 Cleaning the ROS Windows................9-3 Replacing Consumable Supplies..................9-3 Ordering Supplies....................9-4 ® ® Xerox Versant 2100 Press User Guide...
  • Page 6 Information about Paper Jams..............10-28 Paper Jams Inside the Press................10-29 Clearing Jams in Transfer Drawer (Area 2)........10-29 Clearing Jams in the Output Module (Areas 3, 4 and 5)......................10-31 Paper Jams in Trays 1-3..................10-34 ® ® Xerox Versant 2100 Press User Guide...
  • Page 7 OHCF (Trays 8 and 9) Paper Jams at Lever 1a and Knob 1c......................11-13 OHCF (Trays 8 and 9) Paper Jams at Lever 1b and Knob 1c......................11-14 OHCF (Trays 8 and 9) Paper Jams at Lever 1d and Knob 1c......................11-14 ® ® Xerox Versant 2100 Press User Guide...
  • Page 8 GBC AdvancedPunch Jam Clearance............13-8 Clearing Jams in the AdvancedPunch..........13-8 14 GBC AdvancedPunch Pro..............14-1 AdvancedPunch Pro Overview..................14-1 AdvancedPunch Pro Specifications...............14-2 AdvancedPunch Pro Components................14-3 Operation Controls....................14-3 Punch Chip Container..................14-3 Punch Modes......................14-3 AdvancedPunch Pro User Display Panel..............14-4 ® ® Xerox Versant 2100 Press User Guide...
  • Page 9 AdvancedPunch Pro General Problems.............14-24 Die Set End of Life....................14-24 Clearing Paper Jams in the AdvancedPunch Pro........14-25 15 High Capacity Stacker (HCS)............15-1 HCS Overview........................15-1 HCS Introduction....................15-1 Identifying the HCS Components..............15-2 HCS Control Panel..................15-3 ® ® Xerox Versant 2100 Press User Guide...
  • Page 10 Paper Jams in the Post-Process Inserter (Tray T1)....16-17 Paper Jams Inside the Finisher Left Cover.........16-17 Paper Jams Inside the Finisher Right Cover......16-20 Paper Jams at the Optional C / Z Folder........16-23 Paper Jams at Finisher Top Tray............16-27 ® ® viii Xerox Versant 2100 Press User Guide...
  • Page 11 Standard Finisher Plus Overview.................18-1 Specifications for the Standard Finisher Plus............18-2 Finisher Module Specifications..............18-2 Optional C / Z Folder Specifications.............18-3 Finishing Transport Specifications..............18-4 Finisher Module.........................18-4 Finisher Module Main Components.............18-4 Fold Feature......................18-5 Fold Types.......................18-6 ® ® Xerox Versant 2100 Press User Guide...
  • Page 12 Paper Jams in Area 1................18-27 Paper Jams in Area 2................18-28 Paper Jams in Area 3................18-28 Paper Jams in Area 4................18-29 Stapler Faults......................18-30 Staple Jams in the Standard Staple Cartridge......18-31 Reinserting the Basic Staple Cartridge........18-32 ® ® Xerox Versant 2100 Press User Guide...

  • Page 13: Product Overview

    Product Overview Press Overview ® ® The Xerox Versant 2100 Press is a full color / black and white, auto-duplex press that operates at a speed of 100 prints per minute (when printing on 8.5 x 11 inch / A4 paper).

  • Page 14: Press Components

    Open this door to access the registration area and paper handling drawer to clear paper jams. This area also includes the Transfer Drawer and Xerographic Drawer for replacing customer replaceable units (CRUs). ® ® Xerox Versant 2100 Press User Guide...

  • Page 15: Locating The Press Serial Number

    3. If there is a loss of power and it is not possible to access the Machine Status screen, the press serial number can also be found on the inside frame of the press near the Paper Tray 1 drawer: a) At the press, fully open Paper Tray 1. ® ® Xerox Versant 2100 Press User Guide...

  • Page 16: Status Lights

    4 Machine Status button Use to check the press configuration, the software version, the press billing meter and counter information, and to access and print job history or error reports. ® ® Xerox Versant 2100 Press User Guide...

  • Page 17: Logon

    The three indicator lights that identify: data transmission in progress, the press is experiencing an error, and main power is on. Logon There are two logon levels: • Guest / Operator: This is the default logon user. You are automatically logged on as Guest. ® ® Xerox Versant 2100 Press User Guide...

  • Page 18: Language

    By default, the press automatically enters the Low Power mode after 15 minutes of inactivity. After 60 minutes of inactivity, the press then enters Sleep mode. These time intervals for both modes can be changed by the system administrator. ® ® Xerox Versant 2100 Press User Guide...

  • Page 19: Low Power Mode

    There are three power switches involved with the press: • The Breaker switch located at the rear of the press. Initially check to make sure this switch is set to On when the press is shipped. ® ® Xerox Versant 2100 Press User Guide...

  • Page 20: Power On / Off The Press

    • The Main Power switch located inside the Center Front Door. This switch is used mainly by the Xerox Service Representative when servicing the press. In rare problem solving cases, you may be directed to power off the press with this switch.

  • Page 21: Feeding And Finishing Devices

    13 x 19.2 in. / 330 x 488 mm in size and weighing between 52 gsm and 350 gsm. Each tray holds 2,000 sheets of coated and uncoated stock. ® ® Xerox Versant 2100 Press User Guide...

  • Page 22: Bypass (Tray 5)

    Output print sheets can be offset for easy separation. The maximum capacity of the tray is 500 sheets of 24 lb. (90 gsm) paper. Interface Module Important The Interface Module is required with any inline finishing devices installed with the system. ® ® 1-10 Xerox Versant 2100 Press User Guide...

  • Page 23: Gbc ® Advancedpunch

    47-hole. ® ™ AdvancedPunch The GBC AdvancedPunch Pro may be attached to a variety of optional finishing accessories and provides all the same capabilities as the GBC AdvancedPunch. ® ® Xerox Versant 2100 Press 1-11 User Guide...

  • Page 24: High Capacity Stacker

    Information on this device can be found later in this guide. Information can also be found on the customer documentation CD that came with the accessory, or it can be downloaded from www.xerox.com. High Capacity Stacker The High Capacity Stacker (HCS) is an optional finishing device that provides production stacking and offsetting capabilities of up to 5,000 sheets to a cart in the Stacker Tray.

  • Page 25: Squarefold ® Trimmer Module

    Finisher but also serves as an interface to transfer paper between the print engine and any third-party, Document Finishing Architecture (DFA) device attached to the press. Note The Standard Finisher Plus requires the Interface Module. ® ® Xerox Versant 2100 Press 1-13 User Guide...

  • Page 26: Third-Party Finishing Devices

    Product Overview Third-Party Finishing Devices Additional third-party, Document Finishing Architecture (DFA) devices are also available for your press. Information on these DFA devices can be obtained by contacting your Xerox sales representative. ® ® 1-14 Xerox Versant 2100 Press User Guide...

  • Page 27: Where To Find Help

    Where to Find Help Help on the Xerox Web Site For technical product support, Xerox supplies, customer documentation, and answers to frequently-asked questions, go to www.xerox.com. You will find the latest documentation and the knowledge base under Support & Drivers. Use the Contact link for specific contact information / telephone numbers in your area.

  • Page 28: Stock Library Manager Online Help

    • The EFI Print Server Help menu on the Command WorkStation window is designed to provide information on specific work flows when using the Command WorkStation. Additional user documentation supplied by EFI is available to you from www.xerox.com under the Support and Drivers link.

  • Page 29: Technical Specifications

    - Bypass (Tray 5): 3.86 x 5.75 in. / 98 x 146 mm - Trays 6 and 7: 3.86 x 5.75 in. / 98 x 146 mm • Maximum: - Trays 1-3: 13 x 19.2 in. / 330.2 x 488 mm ® ® Xerox Versant 2100 Press User Guide...

  • Page 30: First Print: Out Time

    • Paper weight range of 18 lb. Bond to 95 lb. Cover (64 gsm to 256 gsm) • Paper sizes starting at 5.51 x 7.17 in. / 140 x 182 mm to a maximum of 13 x 19.2 in. / 330.2 x 488 mm ® ® Xerox Versant 2100 Press User Guide...

  • Page 31: Throughput / Productivity Information

    8.5 x 11 / A4 uncoated 64 to 256 gsm Simplex / Duplex 100 ppm / 50 ppm and coated 8.5 x 11 / A4 Labels 106 to 256 gsm Simplex 40 ppm and Transparencies ® ® Xerox Versant 2100 Press User Guide...
  • Page 32 8.5 x 11 uncoated 52 to 300 gsm Simplex / Duplex 60 ppm / 30 ppm and coated A4 uncoated and 52 to 300 gsm Simplex / Duplex 50 ppm/ 25 ppm coated ® ® Xerox Versant 2100 Press User Guide...

  • Page 33: Paper Specifications For Trays 1-3, 5, And 6-7

    Paper Specifications for Trays 1-3, 5, and Note Always refer to the Recommended Media List (RML) for a comprehensive list of supported media. The RML can be accessed from the Stock Library Manager application, and can also be downloaded from http://www.xerox.com/. ® ® Xerox...
  • Page 34 Trays 5, 6 and 7 Square SEF / LEF Labels (coated & uncoated) 8.5 x 11 in. / A4 LEF Trays 1 - 3 106 to 256 Trays 5, 6 and 7 106 to 350 ® ® Xerox Versant 2100 Press User Guide...

  • Page 35: Press Environmental Specifications

    The required humidity range is 15% to 85% (relative humidity) - (RH) J zone (Dew condensation is inhibited) Altitude The press functions at the elevation of 0 to 2,500 meters (0 to 8,200 feet) ® ® Xerox Versant 2100 Press User Guide...
  • Page 36 Technical Specifications ® ® Xerox Versant 2100 Press User Guide...

  • Page 37: Paper And Other Media

    Refer to the System Administrator Guide for how to enable this feature and prioritize the order of trays to search on and use. ® ® Xerox Versant 2100 Press User Guide...

  • Page 38: Loading Media In Trays 1, 2, And 3

    Manager). You can view and set stock attributes and verify trays are assigned with the correct stock. The Stock Library Manager is available from the print server only and not at the press. ® ® Xerox Versant 2100 Press User Guide...

  • Page 39: Loading Tab Stock In Trays 1, 2, And 3

    Note Tab stock is loaded so the straight edge of the stock is in the feed direction. Also, you can only load the tab stock LEF. ® ® Xerox Versant 2100 Press User Guide...

  • Page 40: Loading Transparencies In Trays 1, 2, And 3

    7. Gently push in the tray until it comes to a stop. If enabled by your System Administrator, the Paper Tray Properties window displays on the Stock Library Manager on the print server. The Stock Library Manager is not available at the press. ® ® Xerox Versant 2100 Press User Guide...

  • Page 41: Loading Pre-Drilled Stock In Trays 1, 2, And 3

    9. Select OK to save the information and close the Tray Properties window. Loading Media in the Bypass (Tray 5) Note The Bypass Tray is located on the top of the OHCF (either Trays 6 / 7 or optional Trays 8 / 9). ® ® Xerox Versant 2100 Press User Guide...

  • Page 42: Loading Paper In The Bypass (Tray 5)

    9. Select OK to save the information and close the Tray Properties window. Loading Tab Stock in the Bypass (Tray 5) You can load either single straight collated or single reverse collated tab stock. ® ® Xerox Versant 2100 Press User Guide...

  • Page 43: Loading Transparencies In The Bypass (Tray 5)

    6. Continue to insert the paper or media into the tray until it stops. 7. Adjust the paper guides so that they touch the edges of the stack. ® ® Xerox Versant 2100 Press User Guide...

  • Page 44: Loading Pre-Drilled Stock In The Bypass (Tray 5)

    6. Store unused envelopes in their original packaging to avoid the excess moisture or dryness that can affect print quality and cause wrinkling. Excessive moisture can cause the envelopes to seal before or during printing. ® ® Xerox Versant 2100 Press User Guide...

  • Page 45: Loading Media In The Ohcf (Trays 6 And 7)

    With the Postcard Bracket installed, you can print envelopes from Trays 6 and 7. The stack height is up to 200 envelopes. 1. Slowly open one of the paper trays until it stops and remove the paper. ® ® Xerox Versant 2100 Press User Guide...
  • Page 46 9. Run your print job. 10. Upon completion of your print job, remove the postcard stock and the Postcard Bracket from the tray. 11. Store the Postcard Bracket inside the OHCF front cover area. ® ® 4-10 Xerox Versant 2100 Press User Guide...

  • Page 47: Skew Adjustment Levers (Trays 6 And 7)

    10. Gently push in the tray until it comes to a stop. 11. Run your print job. • The paper is fed accurately without skew and the printed output is satisfactory; your task is complete. ® ® Xerox Versant 2100 Press 4-11 User Guide...

  • Page 48: Loading Paper In The Ohcf (Trays 6 And 7)

    • Weight - select the correct tab stock weight in the range 106 to 176 gsm • Tray / Source - Tray 6 or 7 • Print Output Order / Tab Sequence - 1 to N • Output Delivery - Face Down ® ® 4-12 Xerox Versant 2100 Press User Guide...

  • Page 49: Loading Transparencies In The Ohcf (Trays 6 And 7)

    1. Select the appropriate paper stock for your print job. 2. Pull out the tray slowly until it stops. 3. Fan the transparencies to stop them from sticking together before loading into the tray. ® ® Xerox Versant 2100 Press 4-13 User Guide...

  • Page 50: Loading Pre-Drilled Stock Into The Ohcf (Trays 6 And 7)

    Edge Guide until it lightly touches the edge of the stock in the tray. Do not load materials above the MAX line located on the rear Edge Guide. 8. Gently push in the tray until it comes to a stop. ® ® 4-14 Xerox Versant 2100 Press User Guide...

  • Page 51: Loading Media In The Ohcf (Trays 8 And 9)

    With the Postcard Bracket installed, you could print envelopes from Trays 8 and 9. The stack height is up to 200 envelopes. 1. Slowly open one of the paper trays until it stops and remove the paper. ® ® Xerox Versant 2100 Press 4-15 User Guide...
  • Page 52 9. Run your print job. 10. Upon completion of your print job, remove the postcard stock and the Postcard Bracket from the tray. 11. Store the Postcard Bracket inside the OHCF front cover area. ® ® 4-16 Xerox Versant 2100 Press User Guide...

  • Page 53: Skew Adjustment Levers (Trays 8 And 9)

    10. Gently push in the tray until it comes to a stop. 11. Run your print job. • The paper is fed accurately without skew and the printed output is satisfactory; your task is complete. ® ® Xerox Versant 2100 Press 4-17 User Guide...

  • Page 54: Loading Paper In The Ohcf (Trays 8 And 9)

    • Weight - select the correct tab stock weight in the range 106 to 176 gsm • Tray / Source - Tray 6 or 7 • Print Output Order / Tab Sequence - 1 to N • Output Delivery - Face Down ® ® 4-18 Xerox Versant 2100 Press User Guide...

  • Page 55: Loading Transparencies In The Ohcf (Trays 8 And 9)

    1. Select the appropriate paper stock for your print job. 2. Pull out the tray slowly until it stops. 3. Fan the transparencies to stop them from sticking together before loading into the tray. ® ® Xerox Versant 2100 Press 4-19 User Guide...
  • Page 56 Edge Guide until it lightly touches the edge of the stock in the tray. Do not load materials above the MAX line located on the rear Edge Guide. 8. Gently push in the tray until it comes to a stop. ® ® 4-20 Xerox Versant 2100 Press User Guide...
  • Page 57 • For loading paper or tabs into the Post-Processor Inserter (Tray T1) for the Standard Finisher, Booklet Maker Finisher, or the Standard Finisher Plus, refer to Loading Paper or Tabs in the Post-Process Inserter (Tray T1). ® ® Xerox Versant 2100 Press 4-21 User Guide...
  • Page 58 Paper and Other Media ® ® 4-22 Xerox Versant 2100 Press User Guide...

  • Page 59: Submitting A Print Job

    For complete information on the Stock Library Manager and on how to set up your stock and paper tray settings for the print job, refer to the Online Help in the Stock Library Manager. ® ® Xerox Versant 2100 Press User Guide...

  • Page 60: How To Submit A Print Job

    Note Make sure the appropriate print drivers have been installed on your computer. Refer to your print driver documentation or the Xerox web site for more information on how to download or install print drivers. • At any remote workstation, using a Hot Folders application to submit the document file to the print server.

  • Page 61: Printing From The Freeflow Print Server

    6. Select Import. 7. Select the desired queue such as Process and Hold or Print and Hold. The job is sent to the selected queue or to the press for immediate printing. ® ® Xerox Versant 2100 Press User Guide...

  • Page 62: Printing On Tabs

    4. Once all settings are made, select Print. The press prints the complete set of tabs with the body pages defined. Any extra tabs not used in the job are sent to the output tray. ® ® Xerox Versant 2100 Press User Guide...

  • Page 63: Job Status

    2. Select the Completed Jobs tab to view a list of all jobs that have printed successfully. 3. Select the Group Parent Jobs checkbox to list and display the jobs according to a parent/child relationship hierarchy. ® ® Xerox Versant 2100 Press User Guide...

  • Page 64: Active Jobs Tab

    To print the job details, select Print this Job Report button. b) To print the history of parent / child jobs, select Print this Job History button. 5. After checking the job details, select Close. ® ® Xerox Versant 2100 Press User Guide...

  • Page 65: Machine Status

    Machine Serial Number The Machine Serial Number is displayed in the General Information area on the Machine Information tab. Use this number when calling Xerox for technical information or assistance. ® ®...
  • Page 66 • Auditron Report / Meter Report (available in System Administrator mode only)- This report is not applicable to a print-only system. Maintenance Assistant Select the Maintenance Assistant button to send the Xerox Remote Print Services diagnostic information on the press to Xerox Support. ®...

  • Page 67: Faults Tab

    2. Select the Billing Information tab. The Billing Information screen displays. 3. To view the Billing Impression Mode, press the Tools button on the Control Panel, select the Tools icon, and select Setup > Billing Impression Mode. ® ® Xerox Versant 2100 Press User Guide...

  • Page 68: Billing Impression Mode

    The Billing Impression Mode defines how the press tracks and records impressions made on large-size paper such as A3 or tabloid. The type of Billing Impression Mode used by your press is set during system installation. A Xerox Sales Representative can confirm the Billing Impression Mode applicable for your press.

  • Page 69: Usage Counters

    All Usage Counters This view provides a complete total of all the counters, including the totals from the Impression Counters and Sheet Counters. Update Button Select this button to refresh and update the counts. ® ® Xerox Versant 2100 Press User Guide...
  • Page 70 Machine Status ® ® Xerox Versant 2100 Press User Guide...

  • Page 71: Calibrating The Press

    Refer to your Print Server user documentation when performing the calibration workflow of the Print Server in conjunction with the print engine. Alignment and registration adjustments are performed at the print server. ® ® Xerox Versant 2100 Press User Guide...

  • Page 72: Density Uniformity Adjustment

    Cleaning the fuser assembly is an automated routine you select to address and improve any image quality issues on your print output, such as dry ink/toner debris on the back of a printed sheet. This maintenance task is described in the (Clean Fuser Assembly) procedure. ® ® Xerox Versant 2100 Press User Guide...

  • Page 73: Maintenance

    • If a moistened cloth is used, wipe afterwards with a dry lint-free cloth. Cleaning the press with an excessive amount of water may cause the press to malfunction and/or damage documents during printing. ® ® Xerox Versant 2100 Press User Guide...

  • Page 74: Cleaning The Exterior

    7. Press the Start button. The system begins the cleaning process and displays a “successfully completed” message when finished. Select OK. Note The process with 5 sheets of paper will take approximately one minute. ® ® Xerox Versant 2100 Press User Guide...

  • Page 75: Cleaning The Drum Drawer Area

    The following items are the Customer Replaceable Units (CRU) for the press. It is recommended that you have a supply of these items available to eliminate down time when they need to be replaced. • Dry Ink / Toner cartridges (C, M, Y, K) ® ® Xerox Versant 2100 Press User Guide...

  • Page 76: Ordering Supplies

    Service. Note Store supply items and Xerox parts in their original packages in a convenient location. Always recycle / dispose the used CRU according to the disposal instructions supplied with the new CRU.
  • Page 77 Dry Ink / Toner yield projections are based on 7.5 percent area coverage per color (4 colors = 30 percent) at standardized conditions on A4 (8.5 x 11 in.) Xerox Digital Color Xpressions+ 24 lb. (90 gsm) and Colotech Plus 90 gsm reference paper.
  • Page 78 2. Lift up and open the Bypass Tray cover to access the feed roll components. 3. Remove and replace the feed roll by squeezing the metal shaft and lifting out. 4. Remove and replace the nudger roll using the same technique. ® ® Xerox Versant 2100 Press User Guide...
  • Page 79 Use this procedure to replace the OHCF feed rolls, which includes: • Feed Roll • Nudger Roll • Retard Roll ® ® Xerox Versant 2100 Press User Guide...
  • Page 80 Lift out the nudger roll. 4. Replace the new roll by squeezing both ends of the metal shaft, and pushing down on the black tab, insert and release the roll ends into the notches. ® ® Xerox Versant 2100 Press User Guide...
  • Page 81 7. With the retard assembly out, access and remove the feed roll. To remove, squeeze both ends of the metal shaft and lift out. To replace, squeeze both ends of the new roll shaft, and insert and release the roll ends into the notches. ® ® Xerox Versant 2100 Press User Guide...
  • Page 82 From the screen that displays, select the Tools icon. c) Select System Settings > Common Service Settings > Maintenance. d) Use the up / down arrow buttons to access the next Maintenance screens. ® ® 9-10 Xerox Versant 2100 Press User Guide...
  • Page 83 5. Dispose of or recycle the cartridge per your local authorities and regulations. In the United States, also refer to the Electronic Industries Alliance website: www.eiae.org. For more information about Xerox environmental programs, go to www.xerox.com/environment. 6. Remove the new dry ink / toner cartridge from its packaging.
  • Page 84 1. Ensure that the press is stopped (not running any jobs). 2. Open the front center cover and locate the waste bottle at the bottom right of the press near the door. ® ® 9-12 Xerox Versant 2100 Press User Guide...
  • Page 85 After replacing the drum cartridge, the system automatically resets the High Frequency Service Item (HFSI) usuage counter of this CRU component to zero (0). Check the Consumables screen for the reset and new status. ® ® Xerox Versant 2100 Press 9-13 User Guide...
  • Page 86 1. Ensure that the press is stopped and not currently printing jobs. Proceed to the next step. 2. Open the press Left and Center Front doors. 3. Rotate and turn the R1-R4 Drum Drawer Handle to the unlock position. ® ® 9-14 Xerox Versant 2100 Press User Guide...
  • Page 87 6. Grab the Release Handle and pull the Drum Drawer straight out. 7. Remove the old drum cartridge by holding the finger rings provided at the both ends of the drum cartridge and gently lifting up. ® ® Xerox Versant 2100 Press 9-15 User Guide...
  • Page 88 CRU to zero (0). Caution Make sure the press is powered off before performing this procedure. 1. At the back of the press, locate the Suction filter cover on the lower panel. ® ® 9-16 Xerox Versant 2100 Press User Guide...
  • Page 89 High Frequency Service Item (HFSI) count to zero (0), which indicates a new filter has been installed. a) At the Control Panel, press the Tools button. b) From the screen that displays, select the Tools icon. ® ® Xerox Versant 2100 Press 9-17 User Guide...
  • Page 90 If you exchange the fuser type, you will need to also connect the associated jumper to the assembly to identify the Fuser Width ID being used: • Connecting and Changing the Fuser Width ID ® ® 9-18 Xerox Versant 2100 Press User Guide...
  • Page 91 3. Locate the green Handle (2) and rotate clockwise to the horizontal position to unlock the Transfer Drawer. 4. When the Fuser has cooled, pull the Transfer Drawer out to the jam clearance position. ® ® Xerox Versant 2100 Press 9-19 User Guide...
  • Page 92 8. Remove the two mounting screws using the provided T15 Torx driver and lift the Fuser Top Cover to the access position. ® ® 9-20 Xerox Versant 2100 Press User Guide...
  • Page 93 Do not twist or rotate the module as you place it in the Holding Rack. 13. Place it on the Fuser Holding Rack provided. Align the edge of the roller to the scribe mark on the holding rack frame. ® ® Xerox Versant 2100 Press 9-21 User Guide...
  • Page 94 Maintenance 14. If damaged or end-of-life, place it inside the original box and return to Xerox for recycling. 15. With the Fuser Belt removed, you can now remove and replace the Fuser Stripper Finger Bracket, the Fuser Pressure Roll Assembly and the Pressure Roll Cleaning Pad Assembly.
  • Page 95 7. Replace the Bearing Holder Springs to secure the Pressure Roll in place. 8. Ask the administrator to reset the High Frequency Service Item (HFSI) count for this newly-replaced CRU component at the press Control Panel. Related Topics: ® ® Xerox Versant 2100 Press 9-23 User Guide...
  • Page 96 If a different width fuser is going to be installed, remove the new fuser from its packaging. Otherwise, you will be retrieving the fuser you removed and placed on the Holding Rack. ® ® 9-24 Xerox Versant 2100 Press User Guide...
  • Page 97 There are two in the front and one in the back of the assembly. Proper alignment ensures proper performance. 1. Place the Fuser Belt Module Handles on each side of the belt and reinsert the required Fuser Belt Module into the Fuser Assembly. ® ® Xerox Versant 2100 Press 9-25 User Guide...
  • Page 98 5. Push the black connector in until it clicks into place. Note The three white connectors are keyed and cannot be mixed up. The smallest connector is in the back and the largest is in the front. ® ® 9-26 Xerox Versant 2100 Press User Guide...
  • Page 99 NVM settings in the following table. Also, a clip on the Front Cover of the fuser identifies the width of the fuser being used. ® ® Xerox Versant 2100 Press 9-27 User Guide...
  • Page 100 NVM width values. When you then connect the bypass connector to the fuser, the press detects the fuser type and width and confirms it is appropriate for the system. ® ® 9-28 Xerox Versant 2100 Press User Guide...
  • Page 101 4. Remove the fuser cover by using the T10 Torx driver to unscrew the one mounting screw at the center of the cover. 5. Locate the fuser identifier clip on the fuser assembly and, using a marker, write on the identifier the fuser width being used. ® ® Xerox Versant 2100 Press 9-29 User Guide...
  • Page 102 Cancel the job and submit the correct paper width for that job or install the correct width range fuser. Related Topics: Extending Fuser Life Removing the Fuser Module ® ® 9-30 Xerox Versant 2100 Press User Guide...
  • Page 103 3. If output quality is a problem, take a sample as a reference to assist you in describing the problem over the telephone when answering the questions from the customer support operator about the defects. ® ® Xerox Versant 2100 Press 10-1 User Guide...
  • Page 104 This section contains a problem solving table to help you resolve some basic problems you may encounter with the press. If the problem persists after following all the instructions, contact your Xerox Representative or the Customer Support Center. Note Before contacting Customer Support, refer to the Diagnostic Tool and the Stock Library Manager Online Help for additional problem solving information.
  • Page 105 • Power Off / On the press to restart it. • Your press may not be configured on the network. Contact your System Administrator to connect the press to the network. ® ® Xerox Versant 2100 Press 10-3 User Guide...
  • Page 106 • Check the print server settings. • Check that the paper is loaded correctly as either SEF or LEF and this matches the paper settings programmed at the print server. ® ® 10-4 Xerox Versant 2100 Press User Guide...
  • Page 107 CRU. Paper jams and wrinkles in the Check that the Stripper Finger Assembly is not misaligned or fuser assembly area damaged. If damaged, replace the Stripper Finger Assembly. ® ® Xerox Versant 2100 Press 10-5 User Guide...
  • Page 108 Empty the catch tray when output approaches this limit to ensure continuous production. • Ensure the first sheet is not blocking the paper exit, partic- ularly for 11 x 17 inch (A3) output. ® ® 10-6 Xerox Versant 2100 Press User Guide...
  • Page 109 • Reboot the press by pressing the On / Off button at the Control Panel. ® ® Xerox Versant 2100 Press 10-7 User Guide...
  • Page 110 • Access the print server and perform the print server calibration (refer to the print server documentation). Access the Stock Library Manager and the Advanced Stock Setup screen to perform 1-sided and 2-sided alignment profiles and registration adjustments. ® ® 10-8 Xerox Versant 2100 Press User Guide...
  • Page 111 If spots occur every 147 mm on the prints, run the Halftone Test Pattern to determine which color drum is affected. Replace or swap the Drum (Replacing a Drum Cartridge). ® ® Xerox Versant 2100 Press 10-9 User Guide...
  • Page 112 ROS windows are contaminated. Perform the Cleaning the ROS Windows procedure. Use the provided wand to re- move dry ink / toner that has collected on the ROS window. ® ® 10-10 Xerox Versant 2100 Press User Guide...
  • Page 113 • Check that the stock meets the RML requirements. • Alignment settings may need to be optimized for the media. From the Stock Library Manager, Advanced Stock Setup screen, create or use an existing Alignment Profile. ® ® Xerox Versant 2100 Press 10-11 User Guide...
  • Page 114 If a fault code appears on the press screen and it is not listed in the table below, or if a fault persists after following the listed solution, then contact your Xerox Customer Support Center. If a fault code is displayed, all print data on the press as well as print data stored in the system’s built-in memory is discarded.
  • Page 115 Customer Support Center. 099-339 Fuser Belt in Limit Fail Fuser Belt Assembly is out of position. Reseat the assembly and make sure the Belt Edge Sensor is in contact with the belt edge. ® ® Xerox Versant 2100 Press 10-13 User Guide...
  • Page 116 26-401 Registration error; press Create an Auto Alignment Pro- detected less than optim- file at the Stock Library Man- al registration thresholds ager. If error persists, contact the Customer Support Center. ® ® 10-14 Xerox Versant 2100 Press User Guide...
  • Page 117 (Replacing the Bypass Tray Feed Rolls for the OHCF (Trays 6 and 7) Replacing the Feed Rolls for the OHCF (Trays 6 and 7)). ® ® Xerox Versant 2100 Press 10-15 User Guide...
  • Page 118 2. Replace and fan the paper in 078-150, within period of time tray. 078-151 paper is transporting 3. Replace the OHCF Feed Rolls; from tray refer to Replacing the Feed Rolls for the OHCF (Trays 6 and ® ® 10-16 Xerox Versant 2100 Press User Guide...
  • Page 119 Replacing the Bypass Tray Feed Rolls for the OHCF (Trays 6 and 7) Replacing the Feed Rolls for the OHCF (Trays 6 and 7) Skew Adjustment Levers (Trays 6 and 7) ® ® Xerox Versant 2100 Press 10-17 User Guide...
  • Page 120 8, and tray. paper is transporting 3. Replace the OHCF Feed Rolls; from tray refer to Replacing the OHCF Feed Rolls for the OHCF (Trays 8 and ® ® 10-18 Xerox Versant 2100 Press User Guide...
  • Page 121 Tray 9 2. Replace and fan the paper in tray. 3. Replace the OHCF Feed Rolls; refer to Replacing the OHCF Feed Rolls for the OHCF (Trays 8 and ® ® Xerox Versant 2100 Press 10-19 User Guide...
  • Page 122 Skew Adjustment Levers (Trays 8 and 9) Fault Codes - Interface Module This fault code table lists problems and suggested solutions that apply to the Interface Module. If the problem persists after following all instructions, call your Xerox Customer Support Center. Fault Area...
  • Page 123 040-941 Punch container is missing or Install and / or fully insert punch container; not fully installed. close front door. 040-942 Punch container is full. Empty punch container and then reinstall ® ® Xerox Versant 2100 Press 10-21 User Guide...
  • Page 124 The press configuration can be installed with one or two stacker modules. If the press includes two HCS modules, the prefix 049 identifies a fault in the first module and 149 identifies a fault in the second module. ® ® 10-22 Xerox Versant 2100 Press User Guide...
  • Page 125 If an error caused the printing to end abnormally, or a malfunction occurred in the Booklet Maker Finisher, then an error code is displayed. If an error persists after following the listed solution, then contact your Xerox Customer Support Center.
  • Page 126 Check staples and reset correctly. ready 024-978, 024-989 Booklet Maker Finisher staple Check staples and reset correctly. operation is not ready 024-979 The staple cartridge is empty Check staples. Remove and replace the staple cartridge. ® ® 10-24 Xerox Versant 2100 Press User Guide...
  • Page 127 The top covers cannot be opened during normal operation or when the press is idle. The covers can be opened only when an indicator is lit and a fault occurs within the finisher module. For indicator details, refer to the control panel information. ® ® Xerox Versant 2100 Press 10-25 User Guide...
  • Page 128 Make sure it is pushed in completely. • Follow any instructions on the touch screen. • If fault persists, call for service. ® ® 10-26 Xerox Versant 2100 Press User Guide...
  • Page 129 If the fault persists, contact the Customer Support Center. 051-211 Diverter solenoid fault Power Off / On the press and resend the print job. If the fault persists, contact the Customer Support Center. ® ® Xerox Versant 2100 Press 10-27 User Guide...
  • Page 130 • Paper jams can be removed with the press still powered on. When the power is turned off, all information stored to the system's memory will be erased. ® ® 10-28 Xerox Versant 2100 Press User Guide...
  • Page 131 There are several jam clearance areas of the Transfer Drawer: Registration and Alignment Transport, Registration Roll, Duplex Transport and entrance to Fuser. 1. Make sure that the press has stopped printing before opening doors. ® ® Xerox Versant 2100 Press 10-29 User Guide...
  • Page 132 4. Locate and lift up the green 2b lever to remove jammed paper from the registration area. 5. If paper is jammed at the top of the Transfer Module, remove paper from the registration roll (area 2a) by pulling it straight out. ® ® 10-30 Xerox Versant 2100 Press User Guide...
  • Page 133 Exit Module Drawer. Area 3 clears jams at the entrance baffle. Always refer to the press touch screen for what areas of the press have a paper jam. 1. Make sure that the press has stopped printing before opening doors. ® ® Xerox Versant 2100 Press 10-31 User Guide...
  • Page 134 Entrance Roll. Ensure paper has completely moved through the roll beyond the entrance area. 4. Rotate the 5d knob clockwise to advance paper and pull down on the 5c green lever to remove any paper in this area. ® ® 10-32 Xerox Versant 2100 Press User Guide...
  • Page 135 Rotate the handle to the left to lock the drawer in place. 10. Close the Front Right Door completely. The press will not operate if a door is open even slightly. ® ® Xerox Versant 2100 Press 10-33 User Guide...
  • Page 136 Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared before proceeding with any print jobs. 1. Remove the paper currently loaded in the Bypass (Tray 5). ® ® 10-34 Xerox Versant 2100 Press User Guide...
  • Page 137 Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared before proceeding with any print jobs. 1. Remove the paper currently loaded in the Bypass (Tray 5). ® ® Xerox Versant 2100 Press 10-35 User Guide...
  • Page 138 If paper is torn, check inside the press and remove it. 4. Close the Top Cover of the Bypass (Tray 5). 5. Pull open the (OHCF) Top Drawer (located at the top of Trays 6 and 7). ® ® 10-36 Xerox Versant 2100 Press User Guide...
  • Page 139 Paper Jams inside OHCF Trays 6 and 7 1. Pull out the tray where the paper jam occurred. 2. Remove the jammed paper. ® ® Xerox Versant 2100 Press 10-37 User Guide...
  • Page 140 3. Return the lever 1a to the original position. 4. Close the front cover of the OHCF. Note If the front cover of the OHCF is not completely closed, a message will appear and the machine will not operate. ® ® 10-38 Xerox Versant 2100 Press User Guide...
  • Page 141 If the front cover of the OHCF is not completely closed, a message will appear and the machine will not operate. OHCF (Trays 6 and 7) Paper Jams at Lever 1d and Knob 1c 1. Open the front cover of the OHCF. ® ® Xerox Versant 2100 Press 10-39 User Guide...
  • Page 142 4. Return the lever 1d to the original position. 5. Close the front cover of the OHCF. Note If the front cover of the OHCF is not completely closed, a message will appear and the machine will not operate. ® ® 10-40 Xerox Versant 2100 Press User Guide...
  • Page 143 Table 5: Bypass Connector used for Default Paper Width NVM Settings Range No. Bypass Connector Media size Width range None All paper widths 98.0 - 330.2 mm (3.858 - 13.0 in.) ® ® Xerox Versant 2100 Press 10-41 User Guide...
  • Page 144 300.0 - 330.2 mm (12.09 - 13.00 in.) 13 in. 4 See Note Custom 100.0 - 330.2 mm (3.937 - 13.0 in.) Note Refer to the System Administrator Guide on how to set the NVM width. ® ® 10-42 Xerox Versant 2100 Press User Guide...
  • Page 145 2,000 sheets of 24 lb. (90 gsm) paper. The weight range supported is 52 to 350 gsm. Note The OHCF comes equipped from manufacturing with the Postcard bracket (tray inserter). ® ® Xerox Versant 2100 Press 11-1 User Guide...
  • Page 146 16 lb. to 130 lb. cover / 52-350 gsm Paper capacity 2,000 sheets per tray Important When using up to Xerox 24 lb. / 90 gsm paper. Loading Media in the Chained OHCF (Trays 8 and 9) Refer to Loading Media in the OHCF (Trays 8 and 9) for information and step-by-step instructions.
  • Page 147 1. Locate and access the Bypass Tray on top of the OHCF. 2. Lift up and open the Bypass Tray cover to access the feed roll components. 3. Remove and replace the feed roll by squeezing the metal shaft and lifting out. ® ® Xerox Versant 2100 Press 11-3 User Guide...
  • Page 148 Select Reset Current Value. The system resets the High Frequency Service Item (HFSI) to 0. 9. Exit the administrator mode by pressing the Log In / Out button on the Control Panel. When prompted, select Logout. Related Topics: ® ® 11-4 Xerox Versant 2100 Press User Guide...
  • Page 149 High Frequency Service Item (HFSI) usage counter for these CRU components to zero (0). 1. Pull open the top tray of the OHCF to access the feed components. 2. Notice the feed roll compartment on the right side panel of the drawer. ® ® Xerox Versant 2100 Press 11-5 User Guide...
  • Page 150 6. Slide the retard assembly all the way to the left so it is out of the slots. Pull the assembly out towards you until completely removed from the tray. Set aside. ® ® 11-6 Xerox Versant 2100 Press User Guide...
  • Page 151 Slide the assembly all the way to the right using the pin as a guideline. Ensure the device is all the way into the slots and the 3 screw areas align. ® ® Xerox Versant 2100 Press 11-7 User Guide...
  • Page 152 (Replacing the Bypass Tray Feed Rolls for the OHCF (Trays 8 and 9) Replacing the OHCF Feed Rolls for the OHCF (Trays 8 and 9)). ® ® 11-8 Xerox Versant 2100 Press User Guide...
  • Page 153 3. Replace the tray feed rolls (feed, retard, nudger); refer to Repla- cing the OHCF Feed Rolls for the OHCF (Trays 8 and 4. If problem persists, Call for ser- vice. ® ® Xerox Versant 2100 Press 11-9 User Guide...
  • Page 154 178-400 - 178- An OHCF feed, nudger, Replace the feed rolls; refer to Replacing or retard roll is near the OHCF Feed Rolls for the OHCF end of life (Trays 8 and 9) ® ® 11-10 Xerox Versant 2100 Press User Guide...
  • Page 155 Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared before proceeding with any print jobs. 1. Remove the paper currently loaded in the Bypass (Tray 5). 2. Lift and open the Top Cover of the Bypass (Tray 5). ® ® Xerox Versant 2100 Press 11-11 User Guide...
  • Page 156 6. Lift levers 2a and 2b, and remove any paper jams. 7. Close levers 2a and 2b. 8. Close the (OHCF) Top Drawer. 9. Reload paper into the tray and resume printing. ® ® 11-12 Xerox Versant 2100 Press User Guide...
  • Page 157 2. Move the lever 1a to the right and turn the knob 1c to the right. Remove the jammed paper. Note If paper is torn, check inside the machine and remove it. 3. Return the lever 1a to the original position. ® ® Xerox Versant 2100 Press 11-13 User Guide...
  • Page 158 If the front cover of the OHCF is not completely closed, a message will appear and the machine will not operate. OHCF (Trays 8 and 9) Paper Jams at Lever 1d and Knob 1c 1. Open the front cover of the OHCF. ® ® 11-14 Xerox Versant 2100 Press User Guide...
  • Page 159 4. Return the lever 1d to the original position. 5. Close the front cover of the OHCF. Note If the front cover of the OHCF is not completely closed, a message will appear and the machine will not operate. ® ® Xerox Versant 2100 Press 11-15 User Guide...
  • Page 160 Chained (Second) Oversized High Capacity Feeder (OHCF / Trays 8 and 9) ® ® 11-16 Xerox Versant 2100 Press User Guide...
  • Page 161 The Interface Module is required when any of the finishing devices are attached (except for the Offset Catch Tray). The Interface Module provides cooling and decurling and adjusts the paper height between the print engine and the attached finishing device. ® ® Xerox Versant 2100 Press 12-1 User Guide...
  • Page 162 Manual Curl Up or Down buttons. If the printed output contains too much curl after using these buttons, refer to the Stock Library Manager Online Help for information on adjusting the paper curl. ® ® 12-2 Xerox Versant 2100 Press User Guide...
  • Page 163 The amount of curl correction is changed by selecting Up or Down button. The current selected amount of curl correction is displayed by the Control Panel LEDs. ® ® Xerox Versant 2100 Press 12-3 User Guide...
  • Page 164 Problem Solving Fault Codes - Interface Module This fault code table lists problems and suggested solutions that apply to the Interface Module. If the problem persists after following all instructions, call your Xerox Customer Support Center. Fault Area Fault Code...
  • Page 165 1. Open the front cover of the Interface Module. 2. Move the lever 1a downward and remove the jammed paper. 3. Return the lever 1a to the original position. 4. Close the front cover of the module. ® ® Xerox Versant 2100 Press 12-5 User Guide...
  • Page 166 3. Return the lever 2a to the original position. 4. Close the front cover of the module. 5. Follow the instructions on the press touch screen to clear other areas of the system if needed. ® ® 12-6 Xerox Versant 2100 Press User Guide...
  • Page 167 3. Return the lever 2b to the original position. 4. Close the front cover of the module. 5. Follow the instructions on the press touch screen to clear other areas of the system if needed. ® ® Xerox Versant 2100 Press 12-7 User Guide...
  • Page 168 Interface Module ® ® 12-8 Xerox Versant 2100 Press User Guide...
  • Page 169 Supports tab stock no wider than 9; oversized tabs may be damaged Punch Edge 11 in. (279.4 mm) Paper Bypass Mode Sheet Size Same paper sizes and stocks as the press ® ® Xerox Versant 2100 Press 13-1 User Guide...
  • Page 170 Located on the front of the AdvancedPunch is a panel that provides information relating to the operational state of the punch unit. LED lights indicate when the AdvancedPunch requires attention from the operator. ® ® 13-2 Xerox Versant 2100 Press User Guide...
  • Page 171 The GBC AdvancedPunch is capable of punching a variety of hole-punch patterns by simply changing the punch die. Punch dies can be changed in seconds without tools. Two punch dies are shown in the following illustrations. ® ® Xerox Versant 2100 Press 13-3 User Guide...
  • Page 172 This disengages the Automatic Latching Mechanism and allows the punch die to slide out of the unit. 4. Continue to pull the handle until the Punch Die Set is fully removed, supporting it with both hands. ® ® 13-4 Xerox Versant 2100 Press User Guide...
  • Page 173 From the Hole Punch & More menu select the AdvancedPunch option from the hole punch column. d) Select Save. The main Copy feature displays. The AdvancedPunch will now operate in the punch mode. ® ® Xerox Versant 2100 Press 13-5 User Guide...
  • Page 174 • Once the punch container becomes full, the LED light on the front panel of the AdvancedPunch illuminates, and a message appears on the press User Interface screen. • When this message displays, pull out and empty the container of all paper remnants. ® ® 13-6 Xerox Versant 2100 Press User Guide...
  • Page 175 2. Ensure that the power cord is plugged into the wall outlet. 3. Ensure that the AdvancedPunch power is switched on. 4. If the problem continues, contact the Custom- er Support Center. ® ® Xerox Versant 2100 Press 13-7 User Guide...
  • Page 176 If paper is jammed in the bottom chute of the Punch Paper path, press the bottom chute latch,and remove any jammed paper. If paper is jammed in the upward paper path chute, move the door to the left, and remove the jammed paper. ® ® 13-8 Xerox Versant 2100 Press User Guide...
  • Page 177 • Trail edge, LEF and SEF punching • Full-bleed processing for common sizes including SRA4, oversized LTR and more • Die set detection control panel shows die type and cycle count ® ® Xerox Versant 2100 Press 14-1 User Guide...
  • Page 178 Coated: 120 gsm - 300 gsm (32 lb. bond - 110 lb. cover) Paper Bypass Mode Sheet Paper sizes and stocks are the same as the press Size Punch Capacity Single Sheet ® ® 14-2 Xerox Versant 2100 Press User Guide...
  • Page 179 User Interface (UI). Punch Modes The AdvancedPunch Pro has three punch modes: Bypass Mode (OFF) This mode allows media to pass through the AdvancedPunch Pro without being punched. ® ® Xerox Versant 2100 Press 14-3 User Guide...
  • Page 180 Firmware. Refer toInformation and more. Refer to Messages on User Display Panel. • Alignment on the User Display Panel • Units specific message information. Refer to Settings on the User Display Panel. ® ® 14-4 Xerox Versant 2100 Press User Guide...
  • Page 181 Clearing Paper Jams in the AdvancedPunch Pro. Settings on the User Display Panel The following settings are available on the AdvancedPunch Pro: Punch Mode There are two modes: • Off (Bypass) • Single Punch ® ® Xerox Versant 2100 Press 14-5 User Guide...
  • Page 182 English, French, Spanish, German, or Italian. Units Use this setting to select either inches or millimeters (mm). Information on User Display Panel The following type of information is shown on the User Display Panel when necessary: ® ® 14-6 Xerox Versant 2100 Press User Guide...
  • Page 183 AdvancedPunch Pro can accept. For standard-offering dies that are not found in the chart no pin adjustment is necessary. ® ® Xerox Versant 2100 Press 14-7 User Guide...
  • Page 184 • Statement Paper: Size is 8. 5 inch x 5.5 inch • Legal Paper: Size is 8.5 inch x 14 inch • Ledger Paper: Size is 11 inch x 17 inch ® ® 14-8 Xerox Versant 2100 Press User Guide...
  • Page 185 • Statement Paper: Size is 8. 5 inch x 5.5 inch • Legal Paper: Size is 8.5 inch x 14 inch • Ledger Paper: Size is 11 inch x 17 inch ® ® Xerox Versant 2100 Press 14-9 User Guide...
  • Page 186 US Paper Coil Round Wire 2:1 Wire 3:1 CombBind Wire 2:1 Wire 3:1 Size Round Round Square Square Die Stop Position Based On Paper Size or Orientation LTR LEF LTR SEF ® ® 14-10 Xerox Versant 2100 Press User Guide...
  • Page 187 By selecting the appropriate die set, you can use your AdvancedPunch Pro to punch documents in any of the following binding styles. ® ® Xerox Versant 2100 Press 14-11 User Guide...
  • Page 188 Center-to-Center Hole Spacing: 0.5 in. (12.7 mm) ™ Color Coil Binding C4 Coil; Round; 4 Holes per inch; Hole Size: 0.174 in. (4.4 mm), Diameter; Center-to-Center Hole Spacing: 0.2475 in. (6.3 mm) ® ® 14-12 Xerox Versant 2100 Press User Guide...
  • Page 189 4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 0.256 in. (6.5 mm), Diameter • 4 Ring Binder; Scandinavian (Standard Loose-leaf Patterns); Hole Size: 0.256 in. (6.5 mm), Diameter AdvancedPunch Pro Procedures ® ® Xerox Versant 2100 Press 14-13 User Guide...
  • Page 190 Main Menu. 2. From the Main Menu, select Settings by pressing Enter button on the User Display Panel. 3. From Settings, select the desired feature. • Punch Mode • Backgage Depth Setting ® ® 14-14 Xerox Versant 2100 Press User Guide...
  • Page 191 3. Securely grasp the handle of the die set and rotate it in the clockwise direction, as indicated on the label near the die set lock handle. This releases the die set from the locked position. ® ® Xerox Versant 2100 Press 14-15 User Guide...
  • Page 192 After punching 25 to 50 sheets the die will no longer leave oil on the sheets. It is recommended that a short test print job be run after installing a new die or a die that has recently been oiled. Related Topics: ® ® 14-16 Xerox Versant 2100 Press User Guide...
  • Page 193 Ensure that the pins cannot be dropped, damaged, or lost while stored. 5. Replace the Pressure Bar by performing the following steps: a) Line up the two Dowel Pin Holes with the exposed Dowel Pins. ® ® Xerox Versant 2100 Press 14-17 User Guide...
  • Page 194 If the pins were stored in a different location, retrieve them now. 4. Add the appropriate pins to die set according to either the Pin Removal Table for US Paper Sizes or the Pin Removal Table for ISO Paper Sizes. ® ® 14-18 Xerox Versant 2100 Press User Guide...
  • Page 195 Common paper sizes are shown on the die stop handle label below the die stop knob. For uncommon paper sizes, refer to Die Stop Position Guide for US Paper Sizes Stop Position Guide for ISO Paper Sizes. 1. Choose one of the following: ® ® Xerox Versant 2100 Press 14-19 User Guide...
  • Page 196 AdvancedPunch Pro Maintenance Ordering Supplies for the AdvancedPunch Pro Die Sets can be ordered from the web site www.xerox.com. Search for your press and then click on the Supplies link. For any item that is not orderable from the web site, contact your Xerox Service Representative.
  • Page 197 Die Set, Xerox, Wire, 2:1, Round 1 per box Die Set, Xerox, Coil, Round 1 per box Die Set, Xerox, Velobind, 11 Holes, Letter (8.5 1 per box x 11 inch) Die Set, Xerox, Velobind, 12 Holes, A4. 1 per box...
  • Page 198 4. Run punched test prints until the punched output is clean and free of oil. Lubricating Die Set Pins (with a Felt Pad) 1. Lubricate with a high quality machine oil. ® ® 14-22 Xerox Versant 2100 Press User Guide...
  • Page 199 Install punch die set or fully insert it; close not fully installed. front door. 040-941 Punch chip container is missing Install and / or fully insert punch container; or not fully installed. close front door. ® ® Xerox Versant 2100 Press 14-23 User Guide...
  • Page 200 Note Attempting to replace or sharpen pins will not correct the issue since the wear is in the plates and therefore is not recommended. ® ® 14-24 Xerox Versant 2100 Press User Guide...
  • Page 201 If paper is jammed in the upward paper chute, perform the following steps: 1. Move the lever to the right. 2. Remove the jammed paper. 3. Return the lever to its original location. ® ® Xerox Versant 2100 Press 14-25 User Guide...
  • Page 202 Changing Die Sets in the AdvancedPunch Pro (Removing / Installing). 3. Remove any jammed paper. 4. Reinstall the die set into the punch unit. ® ® 14-26 Xerox Versant 2100 Press User Guide...
  • Page 203 Stacker Tray. Also provides a Top Tray convenient for short stack runs. Note The HCS requires the Interface Module. 1. Interface Module 2. High Capacity Stacker (HCS) ® ® Xerox Versant 2100 Press 15-1 User Guide...
  • Page 204 Stacker Tray, which is located on a movable Stacker Cart. Note The Stacker Tray / Cart capacity may be less than 5000 sheets if the media being used is heavyweight or thicker sheets. ® ® 15-2 Xerox Versant 2100 Press User Guide...
  • Page 205 2. After the Unload Indicator lights, open the HCS front door. 3. Position the securing bar on top of the stacked paper. 4. Pull the Stacker Cart straight out of the HCS. ® ® Xerox Versant 2100 Press 15-3 User Guide...
  • Page 206 HCS sensor faults Power Off/On the machine. If the problem persists, contact the Customer Support Center. 049-300 HCS communication fault Power Off/On the machine. If the problem persists, contact the Customer Support Center. ® ® 15-4 Xerox Versant 2100 Press User Guide...
  • Page 207 Always ensure that all paper jams, including any small ripped pieces of paper, are cleared before proceeding with your print jobs. Note Remedies differ according to the paper jam location. Follow the instructions displayed to remove the jammed paper. ® ® Xerox Versant 2100 Press 15-5 User Guide...
  • Page 208 Perform the following steps to clear the jam and resume printing: 1. Open the HCS Front Cover. 2. Lift the green handle(s) and/or rotate the green knob and remove all paper in the entrance area. 3. Close the green handle(s). ® ® 15-6 Xerox Versant 2100 Press User Guide...
  • Page 209 HCS Top Tray Jam (E7) Perform the following steps to clear the jam and resume printing: 1. Remove any output delivered to the Top Tray. 2. Open the HCS Front Cover. ® ® Xerox Versant 2100 Press 15-7 User Guide...
  • Page 210 6. If the UI indicates there is a jam in the print engine, follow the instructions on the screen to remove any paper in the area indicated. 7. Follow the instructions displayed on the UI to resume printing. ® ® 15-8 Xerox Versant 2100 Press User Guide...
  • Page 211 • Ensure that the press power is switched on. • Ensure that the Ground Fault Indicator is in the On position. • If the power has not been restored by checking the above items, then call for Service. ® ® Xerox Versant 2100 Press 15-9 User Guide...
  • Page 212 High Capacity Stacker (HCS) ® ® 15-10 Xerox Versant 2100 Press User Guide...
  • Page 213 • The Interface Module is required with both finishers, and acts as a communication device and as a paper path between the press and the finisher. • The optional C / Z Folder is available for both finishers. ® ® Xerox Versant 2100 Press 16-1 User Guide...
  • Page 214 This is available only with the Booklet Maker Finisher. There are two staple cartridges for the booklet. Remove this cartridge to replace staples and clear staple jams. 9 Punch Scrap Container Collects the scraps from the puncher. Open to remove the scraps. ® ® 16-2 Xerox Versant 2100 Press User Guide...
  • Page 215 Auto for most situations. The button automatically switches to the Auto mode when: • The press is switched on • The press exits the Power Saver mode ® ® Xerox Versant 2100 Press 16-3 User Guide...
  • Page 216 A Bi-Fold has one fold which creates two panels to the output. There are three Bi-Fold options available: • Bi-Fold Single Sheet • Bi-Fold Multiple Sheets • Bi-Fold Multiple Sheets Stapled ® ® 16-4 Xerox Versant 2100 Press User Guide...
  • Page 217 2. Hold the center of the paper guides and slide them to their desired paper size. 3. Load the paper or tabs, aligning it to the front side of the tray. a) If the paper is preprinted, load the paper with the printed side facing up. ® ® Xerox Versant 2100 Press 16-5 User Guide...
  • Page 218 C / Z Folder Tray: Supports A4 (SEF) and 8.5 x 11 in. (SEF) Delivery to a supported third-party, DFA device: • Maximum: 13 x 19 in., SRA3 • Minimum: B5, Executive (7.25 x 10.5 in.) ® ® 16-6 Xerox Versant 2100 Press User Guide...
  • Page 219 • Maximum: A3 / 11 x 17 in. • Minimum: B5 LEF (2 holes), A4 LEF (4 holes) Number of holes: 2 and 3 (NA), 2 and 4 (Europe) Paper type: 55-220 gsm ® ® Xerox Versant 2100 Press 16-7 User Guide...
  • Page 220 • Fold and Staple: 25 sheets (Available only with the • Fold only: 5 sheets Booklet Maker Finisher) When using Xerox 20 lb., 75 gsm paper, only 14 sheets can be stapled if adding a cover. Paper size: • Maximum: A3, 13 x 18 in.
  • Page 221 • Z-paper size: 11 x 17 in. / A3, 10 x 14 in. / B4, 8K • Capacity: Maximum: 80 sheets (A3 / 11 x 17 in. Xerox 20 lb., 75 gsm paper Z folding) 20 sheets for 8K and 10 x 14 in. / B4 •...
  • Page 222 4. Hold the positions as indicated by the arrow and remove the staple cartridge from the unit. 5. Push a new staple cartridge into the unit. 6. Reinstall the cartridge unit to its original position in the finisher. ® ® 16-10 Xerox Versant 2100 Press User Guide...
  • Page 223 4. Hold the tabs of the staple cartridge unit by the tabs and lift to remove it. 5. While holding the tabs of a new staple cartridge, push it into the unit. 6. Push the staple cartridge unit to its original position in the machine. ® ® Xerox Versant 2100 Press 16-11 User Guide...
  • Page 224 4. Hold R5 as shown in the figure and remove the staple waste container from the press. 5. Place the used staple waste container into a supplied plastic bag. Note Do not return a disassembled (used) container to the Customer Support Center. ® ® 16-12 Xerox Versant 2100 Press User Guide...
  • Page 225 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. ® ® Xerox Versant 2100 Press 16-13 User Guide...
  • Page 226 If an error caused the printing to end abnormally, or a malfunction occurred in the Booklet Maker Finisher, then an error code is displayed. If an error persists after following the listed solution, then contact your Xerox Customer Support Center.
  • Page 227 Check staples and reset correctly. ready 024-978, 024-989 Booklet Maker Finisher staple Check staples and reset correctly. operation is not ready 024-979 The staple cartridge is empty Check staples. Remove and replace the staple cartridge. ® ® Xerox Versant 2100 Press 16-15 User Guide...
  • Page 228 124-709 The number of pages exceeds Decrease the number of pages, or cancel the number of pages that can the stapling settings. Resend the print job. be stapled ® ® 16-16 Xerox Versant 2100 Press User Guide...
  • Page 229 A message is displayed and the machine does not operate if the cover is open even slightly. Paper Jams Inside the Finisher Left Cover Paper Jams at Lever 1a and Knob 1c 1. Make sure that the machine has stopped printing. ® ® Xerox Versant 2100 Press 16-17 User Guide...
  • Page 230 The machine will not operate if the cover is open even slightly. Paper Jams at Lever 1d 1. Make sure that the machine has stopped printing. 2. Open the finisher left cover. ® ® 16-18 Xerox Versant 2100 Press User Guide...
  • Page 231 2. Open the finisher left cover. 3. Move the lever 1b to the right and remove the jammed paper. Note If paper is torn, check inside the machine and remove it. ® ® Xerox Versant 2100 Press 16-19 User Guide...
  • Page 232 4. Return the levers 3b and 3d to their original positions. 5. Close the right cover on the finisher. Note A message will display and the machine will not operate if the right cover is open even slightly. ® ® 16-20 Xerox Versant 2100 Press User Guide...
  • Page 233 A message will display and the machine will not operate if the right cover is open even slightly. Paper Jams at Lever 3g and Knob 3f 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. ® ® Xerox Versant 2100 Press 16-21 User Guide...
  • Page 234 2. Open the right cover on the finisher. 3. Move the lever 4b and turn the knob 3a; remove the jammed paper. Note If paper is torn, check inside the machine and remove it. ® ® 16-22 Xerox Versant 2100 Press User Guide...
  • Page 235 4. Return the lever 2a to its original position. 5. Close the right cover on the finisher. Note A message will display and the machine will not operate if the right cover is open even slightly. ® ® Xerox Versant 2100 Press 16-23 User Guide...
  • Page 236 A message will display and the machine will not operate if the right cover is open even slightly. Paper Jams at 2c, 2e, 2f, and 2d 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. ® ® 16-24 Xerox Versant 2100 Press User Guide...
  • Page 237 A message will display and the machine will not operate if the right cover is open even slightly. Paper Jams at 2d and Lever 2g 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. ® ® Xerox Versant 2100 Press 16-25 User Guide...
  • Page 238 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. 3. Pull out unit 4. 4. Turn the knob 4a to remove the jammed paper from the left side of unit 4. ® ® 16-26 Xerox Versant 2100 Press User Guide...
  • Page 239 3. Open and close the finisher right cover. Note The machine will not operate if the cover is open even slightly. Paper Jams at Finisher Stacker Tray 1. Make sure that the machine has stopped printing. ® ® Xerox Versant 2100 Press 16-27 User Guide...
  • Page 240 If paper is torn, check inside the machine and remove it. 4. Close the right cover on the finisher. Note A message will display and the machine will not operate if the right cover is open even slightly. ® ® 16-28 Xerox Versant 2100 Press User Guide...
  • Page 241 Staple Jams in the Basic Staple Cartridge Note Always check inside the finisher for any individual staples or staple remnants. 1. Make sure that the machine has stopped printing. ® ® Xerox Versant 2100 Press 16-29 User Guide...
  • Page 242 6. Reinstall the cartridge unit to its original position in the finisher. 7. Close the right cover on the finisher. Note A message will display and the machine will not operate if the right cover is open even slightly. ® ® 16-30 Xerox Versant 2100 Press User Guide...
  • Page 243 5. Move the lever on the rear of the staple cartridge unit in the downward direction. 6. While holding the lever down, turn over the unit and remove the staple cartridge from the unit. ® ® Xerox Versant 2100 Press 16-31 User Guide...
  • Page 244 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. 3. While pressing the lever to the right, pull out the booklet staple cartridge unit. ® ® 16-32 Xerox Versant 2100 Press User Guide...
  • Page 245 7. Push the staple cartridge unit to its original position in the machine. 8. Close the right cover on the finisher. Note A message will display and the machine will not operate if the right cover is open even slightly. ® ® Xerox Versant 2100 Press 16-33 User Guide...
  • Page 246 Standard Finisher / Booklet Maker Finisher ® ® 16-34 Xerox Versant 2100 Press User Guide...
  • Page 247 Note Always refer to the Hints and tips section before using the SquareFold Trimmer Module. It provides helpful information on how to set up your job for best output results. ® ® Xerox Versant 2100 Press 17-1 User Guide...
  • Page 248 1. Top Left Cover: Open this cover to remove paper jams. The square fold mechanism is found in this area. 2. Top Right Cover: Open this cover to remove paper jams. The trimming mechanism is found in this area. ® ® 17-2 Xerox Versant 2100 Press User Guide...
  • Page 249 Booklets exiting/leaving the SquareFold Trimmer Module may contain trim remnants or scraps from the previously trimmed booklet. This is due to static electricity build-up and is normal. If booklets contain trim remnants / scraps, simply remove and discard them. ® ® Xerox Versant 2100 Press 17-3 User Guide...
  • Page 250 The Square Fold feature is available only when the press is connected to both a finisher with a booklet maker and the SquareFold Trimmer Module. Note The term Book Pressing is used synonymously with the terms Square Fold or Square Folding. ® ® 17-4 Xerox Versant 2100 Press User Guide...
  • Page 251 (100 gsm or lower). The least amount of pressure that can be applied to the booklet is -2. The following illustration shows two different booklet types: 1. Not square-folded, this booklet has a rounded, thicker appearance to the spine. ® ® Xerox Versant 2100 Press 17-5 User Guide...
  • Page 252 • The Trimmer feature can be switched on or off. When the feature is on, you can adjust the trim setting in 0.1mm / 0.0039 inch increments depending on your requirements for the finished booklet job. ® ® 17-6 Xerox Versant 2100 Press User Guide...
  • Page 253 (lbs. / gsm) finished (mm) booklet 8.5 x 11 in. / A4 5.5 x 8.5 in. / 149 20 lbs. / 75 (210 x 298 mm) x 210 mm ® ® Xerox Versant 2100 Press 17-7 User Guide...
  • Page 254 6 x 9 in. / 152 x 80 lbs. / 120 458 mm 229 mm 12 x 18 in. / 305 x 6 x 9 in. / 152 x 28 lbs. / 105 458 mm 229 mm ® ® 17-8 Xerox Versant 2100 Press User Guide...
  • Page 255 • What is the desired size of the finished booklet? • Does the booklet contain full-page images? • Are you using preprinted covers with full-page images? • Are you trimming the booklet? ® ® Xerox Versant 2100 Press 17-9 User Guide...
  • Page 256 • If fault persists, call for service. 013-221 to 013-228, Jam or communication error Power Off/On the press. If fault persists, call 013-229 to 013-243, with the Module; sensor fails for service. 013-246 ® ® 17-10 Xerox Versant 2100 Press User Guide...
  • Page 257 • Reinsert the container into the module. • Make sure the container is pushed in completely. • If fault persists, power off/on the press. • If fault persists, call for service. ® ® Xerox Versant 2100 Press 17-11 User Guide...
  • Page 258 7. If there is still a jam, open the finisher to look for paper jams along the finisher path. 8. If the press does not resume printing, follow the instructions displayed on the press touch screen. ® ® 17-12 Xerox Versant 2100 Press User Guide...
  • Page 259 4. Turn the knob 4a to the right, and then remove the jammed paper. 5. Close the left cover of the Trimmer unit. 6. If you opened the right cover of the finisher in Step 3, close the cover. ® ® Xerox Versant 2100 Press 17-13 User Guide...
  • Page 260 1. Make sure that the machine is not in operation, and press the button on the right cover of the Trimmer unit to open the cover. 2. Remove the jammed paper. 3. Close the right cover of the Trimmer unit. ® ® 17-14 Xerox Versant 2100 Press User Guide...
  • Page 261 Transport moves the paper from the Finisher Module to one of the three Finishing Transport exits. The height of the paper entry on the third-party, DFA device must align with the Finishing Transport exit 1 or exit 2. ® ® Xerox Versant 2100 Press 18-1 User Guide...
  • Page 262 *When using A4 LEF, B5 LEF, 8.5 x 11 in. LEF, 8 x 10 in. LEF, 7.5 x 10.5 in. LEF only. When using paper of other sizes, tray capacity is 1,500 sheets and 100 sets. **Tray may not support some paper types. ® ® 18-2 Xerox Versant 2100 Press User Guide...
  • Page 263 • Z-paper size: 11 x 17 in. / A3, 10 x 14 in. / B4, 8K • Capacity: Maximum: 80 sheets (A3 / 11 x 17 in. Xerox 20 lb., 75 gsm paper Z folding) 20 sheets for 8K and 10 x 14 in. / B4 •...
  • Page 264 • Paper size: A4 / 8.5 x 11 in. Z-Fold • Number of sheets to be folded: 1 sheet • Capacity: Minimum 30 sheets (When using Xerox 20 lb., 75 gsm paper.) • Paper type: 16-24 lb., 64-90 gsm • Output tray: C / Z Folder tray...
  • Page 265 (SEF). You must select a tray that contains SEF stock. • The various fold types that are available are discussed in Fold Types. • The Single Fold (Bi-Fold) option is available only with the Booklet Maker Finisher. ® ® Xerox Versant 2100 Press 18-5 User Guide...
  • Page 266 • Bi-Fold Multiple Sheets Stapled C-Fold A C-Fold has two folds which creates a three-panel output. Z-Fold A Z-Fold has two folds that are folded in opposite directions, resulting in a type of fan fold. ® ® 18-6 Xerox Versant 2100 Press User Guide...
  • Page 267 / or alignment option. 5. Select OK to save the information and close the Tray Properties window. Finishing Transport Finishing Transport Main Components The Finishing Transport is comprised of the following components: ® ® Xerox Versant 2100 Press 18-7 User Guide...
  • Page 268 The mimic display indicates the status of the Finishing Transport and the location of the paper jams. Location LED Color Status Reason Power indicator Green The Finishing Transport power is on and functioning properly. The Finishing Transport power is off. ® ® 18-8 Xerox Versant 2100 Press User Guide...
  • Page 269 Paper jam in Area 4 Standard Finisher Plus Maintenance Standard Finisher Plus Consumable Supplies Xerox supplies, paper, and throughput material can be ordered from Xerox by going to www.xerox.com and clicking on either the Contact Us link for specific contact information / telephone numbers in your area or by clicking on the Supplies and entering / selecting your specific machine information (product family and model type).
  • Page 270 Replacing the Staple Waste Container The press displays a message indicating that the Staple Waste Container is full. To replace the container: 1. Make sure that the machine has stopped printing. ® ® 18-10 Xerox Versant 2100 Press User Guide...
  • Page 271 6. Hold the new staple waste container by the R5 handle area and push it into the press. Note To prevent injury, do not put your fingers on top of the container. ® ® Xerox Versant 2100 Press 18-11 User Guide...
  • Page 272 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. 3. Pull the container out of the finisher (R4). 4. Discard all the punch scraps in an appropriate container. ® ® 18-12 Xerox Versant 2100 Press User Guide...
  • Page 273 Finishing Module and Finishing Transport paper paths and clear them. If necessary, power Off / On the press and resend your print job. If the fault persists, contact the Customer Support Center. ® ® Xerox Versant 2100 Press 18-13 User Guide...
  • Page 274 If the fault persists, contact the Customer Support Center. Paper Jams in the Finisher Module Paper Jams in the Post-Process Inserter (Tray T1) 1. Press the Cover button. ® ® 18-14 Xerox Versant 2100 Press User Guide...
  • Page 275 2. Open the finisher left cover. 3. Move lever 1a downward and turn knob 1c left. Remove the jammed paper. Note If paper is torn, check inside the machine and remove it. ® ® Xerox Versant 2100 Press 18-15 User Guide...
  • Page 276 If paper is torn, check inside the machine and remove it. 4. Move the lever 1d to the original position. 5. Close the finisher left cover completely. Note The machine will not operate if the cover is open even slightly. ® ® 18-16 Xerox Versant 2100 Press User Guide...
  • Page 277 Paper Jams at Lever 3b and 3d Always ensure that all paper jams, including any small ripped pieces of paper, are cleared before proceeding with your print jobs. 1. Make sure that the machine has stopped printing. ® ® Xerox Versant 2100 Press 18-17 User Guide...
  • Page 278 Always ensure that all paper jams, including any small ripped pieces of paper, are cleared before proceeding with your print jobs. 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. ® ® 18-18 Xerox Versant 2100 Press User Guide...
  • Page 279 2. Open the right cover on the finisher. 3. Move the lever 3g and turn the knob 3f and remove the jammed paper. Note If paper is torn, check inside the machine and remove it. ® ® Xerox Versant 2100 Press 18-19 User Guide...
  • Page 280 3. Move the lever 4b and turn the knob 3a; remove the jammed paper. Note If paper is torn, check inside the machine and remove it. 4. Return the lever 4b its original position. ® ® 18-20 Xerox Versant 2100 Press User Guide...
  • Page 281 2. Open the right cover on the finisher. 3. Move the lever 2a and turn the knob 3a; remove the jammed paper. Note If paper is torn, check inside the machine and remove it. ® ® Xerox Versant 2100 Press 18-21 User Guide...
  • Page 282 3. Move the lever 2b and turn the knob 2c; remove the jammed paper. Note If paper is torn, check inside the machine and remove it. 4. Return the lever 2b to its original position. ® ® 18-22 Xerox Versant 2100 Press User Guide...
  • Page 283 4. If you cannot remove the paper, return the lever 2e to its original position. Swing the lever 2e, turn the knob 2c to the right, and remove the jammed paper. Note If paper is torn, check inside the machine and remove it. ® ® Xerox Versant 2100 Press 18-23 User Guide...
  • Page 284 3. Pull out the folder output tray (2d), swing lever the 2g, and remove the jammed paper. Note If paper is torn, check inside the machine and remove it. 4. Return the opened lever (2g) to its original position, and close the output tray (2d). ® ® 18-24 Xerox Versant 2100 Press User Guide...
  • Page 285 A message will display and the machine will not operate if the right cover is open even slightly. Paper Jams at the Finisher Output Area Always ensure that all paper jams, including any small ripped pieces of paper, are cleared before proceeding with your print jobs. ® ® Xerox Versant 2100 Press 18-25 User Guide...
  • Page 286 Paper Jams at Finisher Stacker Tray 1. Make sure that the machine has stopped printing. 2. Remove jammed paper from the finisher stacker tray. Note If paper is torn, check inside the machine and remove it. ® ® 18-26 Xerox Versant 2100 Press User Guide...
  • Page 287 For a paper jam at the exit of the Finisher Module and the entry of the Finishing Transport, remove it by pulling the paper towards the Finishing Transport. 4. Return the green handle 1 to its original position. ® ® Xerox Versant 2100 Press 18-27 User Guide...
  • Page 288 8. Follow the instructions on the press to restart your print job. Paper Jams in Area 3 Remedies differ according to the paper jam location. Follow the instructions displayed to remove the jammed paper. ® ® 18-28 Xerox Versant 2100 Press User Guide...
  • Page 289 7. Follow the instructions on the press to restart your print job. Paper Jams in Area 4 Remedies differ according to the paper jam location. Follow the instructions displayed to remove the jammed paper. ® ® Xerox Versant 2100 Press 18-29 User Guide...
  • Page 290 Contact our Customer Support Center if the problem persists after you have tried the following solutions. Stapler faults on output may look similar to the ones shown in the following illustration. ® ® 18-30 Xerox Versant 2100 Press User Guide...
  • Page 291 3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge from the finisher. 4. Check the inside of the finisher for any remaining staples, and if necessary, remove them. ® ® Xerox Versant 2100 Press 18-31 User Guide...
  • Page 292 Use this procedure if the standard staple cartridge is inserted incorrectly into the machine. Note Always check inside the finisher for any individual staples or staple remnants. 1. Make sure that the machine has stopped printing. 2. Open the right cover on the finisher. ® ® 18-32 Xerox Versant 2100 Press User Guide...
  • Page 293 6. While holding the lever down, turn over the unit and remove the staple cartridge from the unit. 7. Detach the outside staples along the line. 8. Push a new staple cartridge into the unit. ® ® Xerox Versant 2100 Press 18-33 User Guide...
  • Page 294 9. Reinstall the cartridge unit to its original position in the finisher. 10. Close the right cover on the finisher. Note A message will display and the machine will not operate if the right cover is open even slightly. ® ® 18-34 Xerox Versant 2100 Press User Guide...

Table of Contents