Xerox Versant 2100 User Manual page 247

17
SquareFold Trimmer
Module
SquareFold Trimmer Module Overview
The SquareFold Trimmer Module is an optional finishing device that flattens the spine
of a booklet and performs face trim of the booklet.
The SquareFold Trimmer Module:
• Receives the booklet from the booklet maker area of the finisher
• Flattens the booklet spine, thereby reducing the booklet thickness and giving it the
appearance of a perfect-bound book
• Trims / cuts away the face (edge) of the booklet, resulting in a neat finished edge
The booklet is assembled and stapled in the booklet area of the finisher. The booklet
then enters the SquareFold Trimmer Module already assembled. Any adjustments to
the image of the original and its placement on the booklet page must be set at the print
server.
Note
Always refer to the Hints and tips section before using the SquareFold Trimmer Module.
It provides helpful information on how to set up your job for best output results.
® ®
Xerox Versant 2100 Press 17-1
User Guide