Table of Contents
Advertisement
SquareFold Trimmer Module
Module Control Panel
This area of the control panel consists of:
1. Fault indicators: These indicators light when a fault or jam occurs in a particular
area of the SquareFold Trimmer Module.
a.
This indicator lights when a jam occurs as the booklet is leaving the exit area
of the finisher.
b.
This indicator lights when a jam occurs in the square fold area.
c.
This indicator lights when a jam occurs in the trimmer area.
Note
If one of these indicators (1a, 1b, 1c) is lit, the top covers can be opened, and
the jam/fault cleared; otherwise during normal operation or when the machine
is idle, the top covers cannot be opened.
d.
This indicator lights when the Trimmer Waste Container is pulled out or when
it is full.
2. This area of the control panel consists of the:
a.
Settings button: Press this button to adjust the SquareFold setting.
b.
SquareFold options: Select the desired setting. These settings are discussed in
detail in the SquareFold options section.
Square Fold Feature
The Square Fold feature is available only when the press is connected to both a finisher
with a booklet maker and the SquareFold Trimmer Module.
Note
The term Book Pressing is used synonymously with the terms Square Fold or Square
Folding.
17-4
®
®
Xerox
Versant
2100 Press
User Guide
Advertisement
Table of Contents
