Table of Contents
Advertisement
Standard Finisher Plus
2. Open the right cover on the finisher.
3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
4. Hold the positions as indicated by the arrow and remove the staple cartridge from
the unit.
5. Push a new staple cartridge into the unit.
6. Reinstall the cartridge unit to its original position in the finisher.
7. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Replacing the Staple Waste Container
The press displays a message indicating that the Staple Waste Container is full. To
replace the container:
1. Make sure that the machine has stopped printing.
18-10
®
®
Xerox
Versant
2100 Press
User Guide
Advertisement
Table of Contents
