Xerox Versant 2100 User Manual page 216

Standard Finisher / Booklet Maker Finisher
2. When this button is pressed and the downward curl indicator is lit, downward curl
correction is performed on all printed output. If your output is curled downward,
press this button to prevent downward curls.
3. When this button is pressed and the upward curl indicator is lit, upward curl correction
is performed on all printed output. If your output is curled upward, press this button
to prevent upward curls.
Note
When no indicator is lit, the press does not perform any curl correction to the printed
output.
Fold Feature
The Fold feature is available with certain finishers, which include the Standard Finisher,
Booklet Maker Finisher, and the Standard Finisher Plus.
• If the press is equipped with one of these finishers, you can make prints using the
Fold feature.
• In order to use the Fold feature, the orientation of documents must be short-edge
feed (SEF). You must select a tray that contains SEF stock.
• The various fold types that are available are discussed in
• The Single Fold (Bi-Fold) option is available only with the Booklet Maker Finisher.
• The C-Fold and Z-Fold options are available only with the C / Z Folder, which is
available with the Standard Finisher, Booklet Maker Finisher, and the Standard Finisher
Plus.
• The Fold feature is selected from the print driver (for network print jobs) or from the
scanner (for copy / scan jobs; applicable only if the press is a combination copier and
printer).
Fold Types
Important
The Single Fold (Bi-Fold) option is available only with the Booklet Maker Finisher. The
C-Fold and Z-Fold options are available only with the C / Z Folder.
These fold types are available:
Single Fold (Bi-Fold)
A Bi-Fold has one fold which creates two panels to the output.
There are three Bi-Fold options available:
• Bi-Fold Single Sheet
• Bi-Fold Multiple Sheets
• Bi-Fold Multiple Sheets Stapled
16-4
Fold Types.
® ®
Xerox Versant 2100 Press
User Guide