Access Level Log Out Procedure From The Crt; System Operating Procedures; Viewing A List Of Points; Viewing The Status Of Any System Point - Simplex 4100 Operating Instructions Manual

Hide thumbs Also See for 4100:
Table of Contents

Advertisement

ACCESS LEVEL LOG OUT PROCEDURE FROM THE CRT

To Log Out from the CRT, perform the following procedure.
1. Return to the Main Menu by pressing the <F18> key.
2. With the Main Menu displayed on the CRT, press the <PF4> key on the keyboard.
3. Press the <ENTER> key on the keyboard to Log Out.

SYSTEM OPERATING PROCEDURES

VIEWING A LIST OF POINTS

To view a List of Points, perform the following procedure.
1. Press the <MENU> key on the DISPLAY/ACTION keypad.
2. Using the <NEXT> and <PREVIOUS> keys on the DISPLAY/ACTION keypad, scroll through the Main
Menu items until the "Select a List of Points?" menu prompt appears on the alphanumeric display.
3. Using the <NEXT> and <PREVIOUS> keys on the DISPLAY/ACTION keypad, scroll through the "List of
Lists" until the desired list is displayed on the alphanumeric display on the interface panel.
4. Press <ENTER> on the ENTRY keypad.
5. Using the <NEXT> and <PREVIOUS> keys on the DISPLAY/ACTION keypad, scroll through the chosen
list.
6. When finished, press the <CLR> key on the ENTRY keypad to escape from the Main Menu.

VIEWING THE STATUS OF ANY SYSTEM POINT

To view the status of any system point, perform the following procedure.
1. Press one of the following keys on the ENTRY keypad to select the appropriate class of points:
• Key <ZONE 1> selects a Monitor Point
• Key <SIG 2> selects a Signal Point
• Key <AUX 3> selects a Auxiliary Relay Point
• Key <FB 4> selects a Feedback Point
• Key <I/O 5> selects an I/O Point
• Key <MAP 6> selects a MAPNET II
• Key <P 7> selects a Digital Pseudo Point
• Key <A 8> selects a Analog Pseudo Point
• Key <L 9> selects a List Pseudo Point
• Key <ADDR 0> selects a Numeric Point Address for any point
• Key <NET -> selects a Network Point
2. Using the ENTRY keypad, enter the number of the desired point to be viewed (MAPNET II
Addresses require the use of hyphens).
Point
83
firealarmresources.com
and Numeric

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4100+

Table of Contents