Stalk Controls - Aston Martin One-77 2010 Owner's Manual

Starting the Engine
(Refer to 'Starting the Engine', page 5.2).
Preventing Unnecessary Battery Drain
If the vehicle key is left in the ignition control (position
'0'), some vehicle circuits will stay ON and
unnecessary current will be drawn from the battery.
Always remove the vehicle key from the ignition
control whenever the ignition is set to OFF.

Stalk Controls

Left Side Stalk
Turn Signals -
Press up for a
right turn, press down for a
left turn. Returns to the
centre position on
completion of a manoeuvre.
Hold against spring pressure
to show a lane change.
Main and Dipped Beam -
Pull forwards and latch for
main beam. Pull forwards
again and latch to return to
dipped beam. Pull forwards
and release without latching, at any time while the
vehicle key is in the ignition control, to flash main
beam ON and OFF.
Pull forwards and release without latching, when the
vehicle key is removed, to start Homesafe (Refer to
'Homesafe', page 2.9).
Trip Computer -
Repeated pressing of the
trip function button (A)
moves through the trip
computer displays. (Refer
to 'Trip Computer', page
4.19).
4.15