Selecting A Phone - Aston Martin DB 9 2013 Manual

Removing a Paired Phone
Using the Hands-Free System
Press MENU. Navigate to <Phone menu...> Enter <Bluetooth...>
Enter <Remove Phone> Enter.
A list of paired phones will show. Navigate to the required phone and
press ENTER to erase or BACK to cancel.

Selecting a Phone

The phone to be selected must have bluetooth ON, visible and in
close proximity to the hands-free phone system.
A phone can be selected by using the phone itself or by using the
hands-free system:
Using the Mobile Phone
If not ON or not selected, press PHONE.
Using the Mobile phone, follow the manufactures instructions to
search and connect to a bluetooth device. The phone will search for
discoverable bluetooth devices in its range. Select ASTON MARTIN
from the device list. Select Connect.
If ASTON MARTIN does not show check that the hands-free
system is selected and search again. If ASTON MARTIN still does not
show the mobile phone may not be paired (Refer to 'Pairing Phones',
page 9.5)
Using the Vehicle Hands-Free System
With the hands-free system already selected, press MENU and
navigate to <Phone Menu...> Enter <Bluetooth...> Enter <Change
Phone> Enter. A list of paired phones will show (along with Add
phone). Navigate to the required phone and press ENTER to change
or BACK to cancel.
Or, if the hands-free system is not ON:
Press PHONE. The system will then scan for the last used mobile
phone. If found and it is the mobile required then press ENTER. If the
last phone is not found the DISPLAY will show a list of paired phones
within range (with bluetooth ON). Navigate to a phone and press
ENTER to select that phone.
9.7