Disconnecting A Phone; Pairing Phones - Aston Martin DB 9 2013 Manual

Disconnecting a Phone

The mobile phone will automatically disconnect when moved out of
the Hand-Free system's range or bluetooth is made unavailable on
the mobile phone.
The mobile phone will manually disconnect when the hands-free
system is set to OFF. Press and hold PHONE until
from the DISPLAY. The function is also stopped when the ignition is
set to OFF.
If the mobile phone has been disconnected from the hand-free
system during an ongoing call, the call will transfer to the mobile
phone.
Some mobile phones require that the transfer is confirmed from
the phone's keypad.

Pairing Phones

Initial Pairing
Use this procedure when pairing the first mobile phone to the hands-
free system. If the hands-free system is not ON or in use, press
PHONE.
is removed
The DISPLAY will show NO PAIRED PHONES. PRESS ENTER AND
SELECT ADD A PHONE. Press EXIT to cancel. Press ENTER.
The hands-free system will asked if bluetooth is in discoverable mode
(refer to the mobile phone manufactures instructions). If yes press
ENTER. After a short while a list of phones which are in range and in
discoverable mode will be shown.
If the symbol is shown in the DISPLAY when the ignition
is ON, initial pairing can be completed using the mobile phone.
Press the JOYSTICK (up or down), SCROLL button or turn the
TUNING dial to navigate to the required mobile phone and press
ENTER. The DISPLAY will then ask for a passkey to be entered into
the mobile phone. The mobile phone will prompt for the passkey.
Enter the passkey into the mobile phone.
The DISPLAY will show PHONE CONNECTING... then, if successful,
SYNCHRONISING.
Once synchronising has completed the mobile phone is ready for
use.
If the passkey is not entered after 20 seconds the screen will time-
out.
Synchronising automatically places all the mobile phone contacts
onto the vehicle system.
Pairing Additional Phones
Pairing Using the Hands-Free System
Disconnect any in use phones before pairing additional phones.
If a phone is connected to the hands-free system pairing a new phone
will not be possible until the hands-free system has no in use
bluetooth connections.
If, after 30 seconds, the hands-free phone has not been used, the
infotainment system will default to audio functions. Return to hands-
free phone functions by pressing PHONE or CALL.
9.5