Table of Contents
Advertisement
Gree
（3）Remove the fixing bolt, take away the gas-liquid separator.
①. Remove 4 fixing bolts (applicable to model GMV-VQ224/280/335WM/C-X).
②. Remove 3 fixing bolts (applicable to model GMV-VQ400/450/504/560/615WM/C-X).
Warning!
①. Safety protection must be done during welding.
②. After unsoldering the welding point, separate the pipe nozzle and the gas-liquid
separator nozzle for ten seconds to prevent the two nozzles from sticking together. After taking out
the gas-liquid separator, check whether there are impurities and other substances in the gas-liquid
separator. For the checking process, please refer to the compressor oil quality confirmation.
GMV6 HR DC Inverter VRF Units Service Manual
340
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the GMV-VQ680WM/C-X and is the answer not in the manual?