Group Setting For Refresh - Mitsubishi Electric MELSEC iQ-R Series User Manual

Group setting for refresh

Refresh can be performed when a specified program is executed
the number for each module.
*1 Input refresh (load of analog input, Input (X)) is performed before execution of a program, and output refresh (analog output, Output (Y))
is performed after execution of a program.
Refresh group setting
A group number is set to each program.
[CPU Parameter]  [Program Setting]  [Program Setting]  [Detailed Setting]
Window
Displayed items
Item Description
Refresh Group Setting Set the group number of each program which is specified for each
module.
When the specified group number is not set in the refresh settings of each module, the program is executed,
but the refresh of the relevant group number is not executed.
Refresh setting of each module
Select "At the execution time of specified program" in "Refresh Setting" of each module, and type the group number of the
program to be refreshed.
[Module Parameter]  [Refresh Setting]
Window
(Example: The "Refresh Setting" window for an I/O module)
For refresh of each module, refer to the manual for the module used.
*1
by setting a group number to each program and specifying
Setting range
• (Do not Set)
• Groups [1] to [64]
Default
(Do not Set)
8 RUNNING A PROGRAM
8.5 Program Execution Type
8
113