Mitsubishi Electric MELSEC iQ-R Series User Manual page 400

Process cpu module

Hide thumbs Also See for MELSEC iQ-R Series:

Table of Contents

■Detailed setting

Set devices and labels to be transferred for each tracking block (No.1 to 64) to be used.

[CPU Parameter]  [Redundant System Settings]  [Tracking Setting]  [Device/Label Detailed Setting]

Displayed items

Device Detailed

Global Device Setting

Local Device Setting

Label Detailed

Global Label Setting

Local Label Setting

Module Label (Extension)

Block Size Setting

*1 Global labels with devices assigned are not transferred as global labels. They are transferred according to the tracking settings of the

assigned devices.

When setting devices and labels for tracking transfer, click the [Size Calculation] button to check if the tracking

data capacity in one scan is equal to or less than 1M words. ( Page 404 Data capacity for tracking

26 REDUNDANT FUNCTION

26.3 Tracking Transfer

Set global devices to be transferred. ( Page 399 Global device

Set whether to transfer local devices or not.

When "Transfer" is set, all the local devices are transferred.

For the devices that can be set as local devices, refer to the following.

Page 390 Devices that can be specified

Set whether to transfer global labels or not.

When "Transfer" is set, all the global labels assigned to the device/label

memory are transferred.

Set whether to transfer local labels or not.

When "Transfer" is set, all the local labels are transferred.

Set whether to transfer module labels of the modules on the extension

base unit for each tracking block or not. When "Transfer" is set, the

range that was set for the refresh target on the module label in the

refresh settings parameter for each module is transferred.

Calculates "Block Size Setting" of each tracking block and "Total" of the

setting capacity.

Troubleshooting