Mitsubishi Electric MELSEC iQ-R Series User Manual page 194

Process cpu module
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

Setting the initial value for registering/changing label definition
The initial value used when registering/changing label definition can be set. ( GX Works3 Operating Manual)
■Initial value setting availability
Indicates whether or not the initial value can be set when adding or changing a label.
: Available, : Conditionally available, : Not available
Label type
Program block
FB definition
FUN definition
*1 The initial value can be set only when a new area is assigned again.
*2 A different initial value can be set for each instance.
*3 Since the local label in FUN definition is an undefined value, initialize it by a program in the FUN definition before using it in a program.
When using GX Works3 version 1.000A
• When the label definition (the initial value or any other value) is changed, write the initial label value file to
the CPU module after the online change (ladder block). Otherwise, an error occurs when the CPU module is
powered off and on or reset, or the module operating status is changed from STOP to RUN.
• To clear all the initial values, delete the initial label value files in the CPU module. If the boot operation is
being performed, the initial label value files are stored on the SD memory card. Delete the initial label value
files on the SD memory card, and also delete the files set in the module card parameters ("Boot File
Setting"). Otherwise, an error occurs when the CPU module is powered off and on or reset, or the module
operating status is changed from STOP to RUN.
In redundant mode
• When the online change (ladder block) is performed on the CPU module in one system in backup mode, the change is also
reflected on the CPU module in the other system. In separate mode, only the ladder block of the CPU module in the system
specified in the transfer setup of the engineering tool is changed.
14 WRITING DATA TO THE CPU MODULE
192
14.2 Online Change
Global label
Local label
Local label
Local label
Label addition
*2
*3
Label change
*1
*1
*1
*3

Advertisement

Table of Contents
loading

Table of Contents