Module Parameters; Memory Card Parameters - Mitsubishi Electric MELSEC iQ-R Series User Manual

Process cpu module

Hide thumbs Also See for MELSEC iQ-R Series:

Table of Contents

Routing Setting

Redundant System Settings

*1 When the device/label operation save setting is set to "Do not save", the value is 3504H.

Module parameters

The following are the lists of module parameters.

Ethernet function

For the module parameters relating to the Ethernet function, refer to the following.

 MELSEC iQ-R Ethernet User's Manual (Application)

The following is the list of memory card parameters.

Boot Setting

Setting of File/Data Use or Not in Memory Card

Appendix 8 Parameter List

Routing Setting

SFC Program Start Mode Setting

Start Condition Setting

Output Mode at Block Stop Setting

Redundant System Behavior Setting

Tracking Setting

Redundant System with Extension Base Unit

Signal Flow Memory Tracking Setting

Tracking Device/Label Setting

Extension Cable Redundant Error Detection

Setting at Startup

Automatic Standby System Recovery Function

Operation Setting at CPU Built-in Memory Boot

Boot File Setting

Data for Label Communication

Module Extended Parameter

Parameter No.

Parameter No.