Mitsubishi Electric MELSEC iQ-R Series User Manual page 639

Event Event Event
code type category
20100 Operation Info
20200
20300
20301
20400
20401
20414
20415
20500
20501
20502
20503
20510
24000
24001
24100
24101
24102
24120
24121
24200
24201
24202
24300
Detected event Description
Error clear The error was cleared.
Event history clear The event history was cleared.
SD memory card The SD memory card was enabled.
enabled
SD memory card The SD memory card forced disable
forcibly disabled function was executed and the SD
memory card became ready to be
removed.
Firmware update RnPCPU firmware update using the
successful via SD SD memory card was performed and
memory card completed successfully.
(RnPCPU)
Firmware update RnPCPU firmware update using the
failed via SD memory SD memory card was performed and
card (RnPCPU) was not completed successfully.
Firmware update Firmware update using the
successful via engineering tool was performed and
engineering tool completed successfully.
Firmware update Firmware update using the
failed via engineering engineering tool was performed and
tool was not completed successfully.
CPU module data Data in the CPU module were
backup succeeded successfully backed up.
CPU module data Backup of data in the CPU module
backup failed failed.
CPU module data Data were successfully restored to
restoration the CPU module.
succeeded
CPU module data Restoration of data to the CPU
restoration failed module failed.
CPU module data Backup function cannot be set
backup setting
disabled
Clock setting The clock data was set.
Remote operation A remote request (RUN, STOP, or
request accepted PAUSE) was accepted.
Operating status The operating status of the CPU
change (RUN) module was changed to RUN.
Operating status The operating status of the CPU
change (STOP) module was changed to STOP.
Operating status The operating status of the CPU
change (PAUSE) module was changed to PAUSE.
Starting the program The program was started.
Stopping the program The program was stopped.
Creation of new • A new folder was created.
folders, writes to files/ • A new file was created or data was
*1
folders written to a file.
*1
File copy A file was copied.
*1
Folder/file rename A folder name or file name was
changed.
Module A module communication test was
communication test executed.
Detailed information
1 2
Operation Operation target
source information
information


Firmware
update
information
(RnPCPU)
Operation Firmware
source update
information information
CPU module Target folder
data backup/ information of
restoration the CPU
information module data
backup/
restoration
function

CPU module
data backup
setting
information
Operation Clock
source information
information (before change)
Remote
operation type
information
 
Operation Program start
source information
information
Program stop
information
Drive/file
information
Copy source
drive/file
information

37 EVENT LIST
37.2 Event List
3

37
Clock
information
(after change)

Copy
destination
drive/file
information

637