Siemens SIRIUS 3RK3 Equipment Manual page 44

Overview
3.5 MSS 3RK3 system components
Accessories
You require the following accessories when using the modules:
Component Description
Parameterization
•
and diagnostics soft‐
ware
•
•
•
Connection cables
•
•
•
•
Connection cable to
•
the diagnostics dis‐
play
•
•
•
44
The Safety ES software is available in three li‐
cense variants: Basic, Standard, Premium
The Safety ES software provides a graphical ed‐
itor (logic diagram) for entering, displaying, and
performing diagnostics on the interconnection
logic.
The Safety ES software provides the following
functionalities:
– You use the logic diagram to parameterize
the safety functions for the MSS 3RK3.
– The MSS 3RK3 is accessed for parameteriza‐
tion and diagnostics over a PC cable or by
means of PROFIBUS-DP and DP interface (op‐
tional).
– You can also upload an existing configura‐
tion from the 3RK3 central unit to the PC or
programming device.
– The diagnostics functionality of the software
enables you to diagnose the MSS 3RK3 on‐
line.
– You can force outputs when commissioning
the MSS 3RK3.
Article number: 3ZS1316-*
Ribbon cable for data connection of system com‐
ponents via the system interfaces
Mechanically-coded and color-coded protection
against reverse polarity
0.025 m ("adjacent")
Article number: 3UF7930-0AA00-0
Ribbon cable for the data connection from the
3RK3 central unit to the diagnostic display
Mechanically-coded and color-coded protection
against reverse polarity
Max. 2.5 m
Article numbers:
– 3UF7931-0AA00-0: 0.1 m, (flat)
– 3UF7935-0AA00-0: 0.3 m, (flat)
– 3UF7932-0AA00-0: 0.5 m, (flat)
– 3UF7932-0BA00-0: 0.5 m, (round)
– 3UF7937-0BA00-0: 1 m, (round)
– 3UF7933-0BA00-0: 2.5 m, (round)
Diagram
Flat:
Round:
SIRIUS 3RK3 Modular Safety System
Equipment Manual, 07/2020, NEB926253002000/RS-AC/006