Siemens SIRIUS 3RK3 Equipment Manual page 336

Diagnostics / service
7.7 Diagnostics with diagnostics display
③
Group errors
The following group errors can be diagnosed:
Message
Configuration error
Configuration error
Safety protocol error
Wiring error
Logic error
Handshake error
Group error from user pro‐
gram
SC bus error
SC configuration error
Memory module defective
User memory too small
1) Different error causes are possible. The cause is displayed by pressing the right key (OK).
Pressing the right key (OK) switches the diagnostics display directly to the relevant function element in
2)
the status menu.
3RK3 only
3)
4) 3RK3 Advanced and 3RK3 ASIsafe only
336
Meaning(s)
1) •
•
•
•
An error occurred during the configuration phase:
1)
•
•
•
•
•
•
•
•
•
•
4) •
•
•
Faulty wiring of a sensor connection or in the sensor itself.
2)
2) Protection fault: Processing sequence on the sensor not coherent.
An error was detected during connection monitoring in test mode.
At least one error from the user program is present.
2)
Communication via the system interface is interrupted.
3)
The actual configuration of an existing communication connection does
3)
not match the target configuration. This resulted in an error.
Memory module is defective.
More configuration data were transferred to the safety relay than can be
stored in the configuration memory.
Memory module not plugged in
SC configuration error
3)
Memory module defective
Memory module too small
Release denied due to incorrect configuration CRC
Release canceled due to incorrect configuration release CRC
Max. number of elements exceeded
Max. size of memory exceeded
Program cycle time exceeded
TARGET≠ACTUAL configuration
TARGET≠ACTUAL slot expanded configuration
Invalid parameter value
Interconnection rule violated
Data structure incorrect
Multiple ASIsafe code tables
ASIsafe 8x4-bit code sequence error
ASIsafe 7x4-bit code sequence error
Equipment Manual, 07/2020, NEB926253002000/RS-AC/006
4)
4)
4)
3)
SIRIUS 3RK3 Modular Safety System
3)