Diagnostics / service
7.8 Restoring factory settings
Note
Factory settings with connected DP interface
As communication with the DP interface is interrupted when the factory settings are being
restored, you must switch the entire system off and then on again once the they have been
restored.
Note
Factory settings of the diagnostics display
The factory settings for the diagnostics display can also be restored; see Chapter "Display settings
(Page 344)."
Note
Factory settings for DP interface
The factory settings for the DP interface can also be restored; see Chapter "Restoring factory
settings (Page 201)."
348
SIRIUS 3RK3 Modular Safety System
Equipment Manual, 07/2020, NEB926253002000/RS-AC/006