Siemens SIRIUS 3RK3 Equipment Manual page 286

Diagnostics / service
7.4 Diagnostics via PROFINET
Error Description
no.
24 Actuator disconnection
25 Safety-related tripping
286
Error numbers
Explanation
Group error:
• Error in configuration
• Configuring error
• Protocol error on a bus
• Handshake error
• Group error from user program
• Wiring error
• Logic error
• Release denied due to incorrect configura‐
tion CRC
• Release canceled due to incorrect configura‐
tion release CRC
• Max. number of elements exceeded
• Max. size of memory exceeded
• Program cycle time exceeded
• TARGET≠ACTUAL configuration
• TARGET≠ACTUAL slot expanded configura‐
tion
• Invalid parameter value
• Interconnection rule violated
• Data structure incorrect
• Memory module not plugged in
• Memory module defective
• Programming error
• Memory module too small
• Self-test error (device error)
• System interface configuration error
Logic error (user program)
Remedy
Eliminate cause of error and ac‐
knowledge
Eliminate cause of message
SIRIUS 3RK3 Modular Safety System
Equipment Manual, 07/2020, NEB926253002000/RS-AC/006