Siemens SIRIUS 3RK3 Equipment Manual page 346

Diagnostics / service
7.7 Diagnostics with diagnostics display
• 5 min
• On
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
Return to the status display
This menu option specifies whether and at what time to switch back to the status display from
the current menu.
The following settings are possible:
• Manual
• 3 s
• 10 s (default setting)
• 1 min
• 5 min
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
⑦
Invert display
This setting makes it possible to specify whether the display should be displayed normally or
inverted. The readability of the display can be improved in the event of difficult lighting
conditions.
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
⑧
Messages
This setting makes it possible to specify whether to automatically switch to the "Messages" menu
if messages are pending and to display the messages (default setting) or whether the status
display should remain.
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
⑨
Factory settings
The factory setting makes it possible to reset the display settings to the default settings.
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting. A prompt for confirmation then follows that also has to be confirmed with the right key
(OK).
346
⑥
SIRIUS 3RK3 Modular Safety System
Equipment Manual, 07/2020, NEB926253002000/RS-AC/006