NAVIS NavDP 4000 Series Operation Manual page 94

5.12.1.3 Sensors View
The view contains a list of sensors and serves to set parameters of the selected sensor (see Figure 5.44).
Sensor buttons are color coded. The color indicates the state of the sensor.
To jump between the sensors buttons use the encoder.
The selected buttons is yellow-frame indicated.
5.12.1.4 Thrusters View
The view contains the list of the thrusters (see Figure 5.45).
Thruster buttons are color coded. The color indicates the state of the sensor.
To jump between the sensor buttons use the encoder.
The selected button is indicated with yellow frame.
93
Figure 5.43: DP, AutoHDG mode
Figure 5.44: Sensors View
Figure 5.45: Thruster View
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
NAVIS NavDP 4000. Operation Manual