NAVIS NavDP 4000 Series Operation Manual page 263

Alarm Messages List
Error Time Auto Synchronize: no ZDA data
((GPSS))
Error Time Auto Synchronize: Selected GPS
was turned off
Info ——— CPU Time was corrected
Info System Time was corrected
Info TAL Replay Started
Info TAL Replay Stopped
Warning Conseq analysis: power critical if (BUSS)
lost
Warning Conseq analysis: power critical if (GEN-
ERATORS) Generator lost
Warning Conseq analysis: thrust critical if (EN-
GINES) lost
Warning Conseq analysis: thrust critical if (TTHRS)
lost
Warning System change TAL Mode: mode1 -
mode2
Warning Track trimmed to maximal allowed length.
Warning External track trimmed to maximal al-
lowed length.
Info New way point.
Info TAL Mode: MODE.
Info Cyclic data stored to: FOLDERNAME
Warning Gyro Discrepancy: gyroN and gyroM.
Warning Gyro Median Test: gyroN discrepancy.
Warning Gyro Median Test: gyroN rejected.
Warning GyroN raw data and filter discrepancy
Warning Heading Jump Detected: XXX
Warning Bias of Main Gyro is removed by operator.
Warning Change Main SENSOR: snsN -¿ snsM
Warning LRN data jump detected.
Warning Position jump detected.
Warning Bias of Origin Reference is removed by
operator.
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
Time Auto Synchronize: no ZDA data
(GPS)
Time Auto Synchronize: Selected GPS
was turned off
——— CPU Time was corrected
System Time was corrected
TAL Replay Started
TAL Replay Stopped
Consequence Analysis
Conseq analysis: power critical if (BUSS)
lost
Conseq analysis: power critical if (GEN-
ERATORS) Generator lost
Conseq analysis: thrust critical if (EN-
GINES) lost
Conseq analysis: thrust critical if (TTHRS)
lost
Dynamic Alarms
System change TAL Mode: mode1 -
mode2
Track trimmed to maximal allowed length.
External track trimmed to maximal al-
lowed length.
New way point.
TAL Mode: MODE.
Cyclic data stored to: FOLDERNAME
Gyro Discrepancy: gyroN and gyroM.
Gyro Median Test: gyroN discrepancy.
Gyro Median Test: gyroN rejected.
GyroN raw data and filter discrepancy
o
PORT Heading Jump Detected: XXX
Bias of Main Gyro is removed by operator.
Change Main SENSOR: snsN -¿ snsM
LRN data jump detected.
Position jump detected.
Bias of Origin Reference is removed by
operator.
o
PORT
262