NAVIS NavDP 4000 Series Operation Manual page 84

Dynamic positioning & independent joystick control system
Table of Contents

Advertisement

Item
Thus to choose the item operator should decide on a class, then decide on a goup, then decide on an item.
The class name of the trend is displayed in the field beside the Class button.
The group name of the trend is displayed in the field beside the Group button.
The list of selected items is displayed in the field beside the Item button.
In case all items have been selected the field contains the note
Items button. This action doesn't make any changes to Class and Group.
Clicking on the Class button switches the settings console to the class selection one (see Figure 5.28). The button of
the current class is white indicated.
It is possible to choose another class or click on the Cancel button to switch back to the settings console. In case
the different class has been selected the class selection console switches to the settings one with the selected class name
displayed near the Class button (see Figure 5.29).
Figure 5.29: The current class name displayed on the settings console.
The same algorithm is for the group selection.
Items are selected from their console and the number of items can be different — from null till all of them (see Figure
5.30). It should be noted that different groups have different numbers of items.
The items console contains:
– item name buttons;
– item legend;
– OK and Cancel buttons.
Selected buttons are white indicated, the nonselected ones stay gray. To deselect an item click on the selected item
name button. The button switches to gray.
After the choice has been done it's necessary to push OK to apply the item list and to switch to the settings console.
Obviously, the only one class and group can be selected. At the same time the number of items can be any but no
more than the number of items of the group.
The full list of items see in Appendix ((K, page 345).
83
All . To delete items from the list use the Clear
Figure 5.28: Class selection console
Figure 5.30: Item consol
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
NAVIS NavDP 4000. Operation Manual

Advertisement

Table of Contents
loading

Related Products for NAVIS NavDP 4000 Series

This manual is also suitable for:

Navdp 4011Navdp 4001Navdp 4022Navdp 4002

Table of Contents