Operation With Tables - NAVIS NavDP 4000 Series Operation Manual

Data Logging
H.4.4 Operation with Tables
Event and Record tables are displayed on the DLA Main Window, on the "Motion" tab (see figure H.15).
These tables are also located on the other layouts in minimized form.
If you want to add Event or Record table to empty layout, press
item in the opened window.
4.1. Event table contains statistics of events for the analyzed time:
– event source (station);
– message type (warning, error, info, etc.). It is displayed as a corresponding icon;
– start time;
– message text;
– end time.
An example of Event table is shown in figure H.21.
Event table window contains the following softkeys:
(Plot/Table Settings) softkey is used for adding of a table;
SYS MSG shows system messages (hidden by default);
USER ACTS shows operator actions (hidden by default);
JOYSTICK shows joystick moving (if available, hidden by default);
(Move) softkey is used for table moving (up/down) and swapping (left/right) (see figure H.20);
(Minimize) softkey is used for minimizing of the table window;
(Expand) softkey is used for expanding of the table window;
(Close) softkey is used for closing of the table window.
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
(Add plot/table/...) softkey and select required
Figure H.21: Event Table
336