Table of Contents
Advertisement
2.7.6 CANCEL
The CANCEL button performs cancellation function, e.g. in case of wrong input.
Keep in mind that the only control panel operations can be cancelled.
2.7.7 Alarm ACK
The Alarm Ack button is meant for acknowledge incoming alarm messages that are displayed in the Alarm Window
(and on the Last Alarm/Message line).
2.7.8 AutoHDG
The AutoHDG pushbutton can be used to select Auto Heading (AutoHDG) control mode.
There are two ways to switch to the AutoHDG mode:
– Double pressing the AutoHDG pushbutton
– Pressing the AutoHDG push button then pressing the Hold pushbutton
In this case the current heading is get as the preset one.
The pushbutton backlight changes to green.
To set the heading different from the current one press the AutoHDG pushbutton once (in any control mode). The
HDG setting dialog appears (see. 5.22).
To change the value turn the rotary knob to get necessary value, then press the knob.
NOTE!
The HDG settings dialog is called in any control mode by the single
pressing the AutoHDG pushbutton.
To switch off the AutoHDG mode press the AutoHDG pushbutton twice.
2.7.9 AutoPOS
The AutoPOS pushbutton is available in the DP mode only it's meant for selecting the Auto Position (AutoPOS)
control mode. The AutoPOS pushbutton can be used to select Auto Position (AutoPOS) control mode.
There two way of switching on the AutoPOS mode:
– press the AutoPOS pushbutton twice;
– press the AutoPOS pushbutton then press the HOLD pushbutton.
In this case the current vessel position is get as the preset one.
The pushbutton backlight changes to green.
To set the offset values press the AutoPOS pushbutton once (in any control mode).
There are two way to change the value:
– with the knob match pushbuttons: press and hold the pushbutton or press the pushbutton several times until the
required value is set.
– with the rotary knob — turn the knob until the required value of the Sway or Surge parameters is set. Press the
knob's pushbutton to switch between the Surge and Sway fields. Then press the knob.
43
NAVIS NavDP 4000. Operation Manual
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
Advertisement
Table of Contents
