Leaving The Service Menu On Dp/Ij Computer - NAVIS NavDP 4000 Series Operation Manual

Unmount USB — management of USB flash drive safe removing.
Item "Unmount USB" is displayed in menu if USB flash drive is connected.
1.3. Press "Service" item to enter the service menu before NAVIS NavDP 4000 automatic start.
If NAVIS NavDP 4000 has started automatically shut down the system using a normal shut down procedure (see
Section 3.6, page 55) and follow steps from item 1.1.
1.4. Enter password "16" using a screen keyboard and press "OK" (see Figure G.2).
If you entered wrong password, "Operation 'Choose User-Level' completed with error(s)" message will appear.
Press "Close" button and follow steps from item 1.3.
1.5. When you enter a correct password service menu will appear (see Figure G.3).
G.1.2 Leaving the Service Menu on DP/IJ Computer
1.1. DP/IJ control computer is in service menu (see Figure G.3).
1.2. To leave a service menu:
303
Figure G.2: DPShell. Enter password
Figure G.3: DPShell Service menu
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
NAVIS NavDP 4000. Operation Manual