Table of Contents
Advertisement
System Functions
Figure 10.27: Dialog Box for the Vessel Position Setting in MultiTarget Mode
If the operator selects MultiTarget mode and two transponders as targets the dialog box for the vessel position setting
in the target coordinate system will be displayed by pressing MTarget softkey, see Figure 10.27.
Target coordinate system:
– the origin is in the Tgt#1;
– X-axis is directed to Tgt#2;
– Y-axis is perpendicular to Tgt#2 so that the shortest turning from X-axis to Y-axis will be directed clockwise.
One yellow-colored circle is drawn in this mode, see Figure 10.28. This is a circle within which a vessel center has to
be situated. Circle radius is equal to reaction radius.
Vessel heading can be controlled:
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
(a) Vessel Position Setting
Figure 10.28: Map View in Multi-Target
(b) Input Offset
188
Advertisement
Table of Contents
