Chapter 2
System Hardware Configuration
As mentioned above, NAVIS NavDP 4000 is the family of systems.
The NAVIS NavDP 4000 system types in accordance with IMO classification system are listed below.
NAVIS NavDP 4011
NAVIS NavDP 4011
NAVIS NavDP 4001
Dual-redundant DP system with integrated joystick system (DP-2)
NAVIS NavDP 4022
NAVIS NavDP 4002
Class DP-0 System Configuration
The Figure 2.1 represents the NAVIS NavDP 4000 standard hardware configuration of IMO Class DP-0 System. The
system contains the following sensors:
– Gyro
– DGPS
– Wind
– VRS
The sensors are connected to the Control Unit via Operator station junction box (JB) while the Thruster system is
connected directly to the Control Unit.
15
Stand-alone single DP control system (DP-0)
DP Control Station
Single DP system with integrated joystick system (DP-1)
DP Control Station
IJ Control Station
DP Control Station
IJ Control Station
NAVIS NavDP 4000. Operation Manual
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"