Position And Heading Display (Map View); Vessel Heading Displaying - NAVIS NavDP 4000 Series Operation Manual

Operator Interface
NOTE! If you want to view help for operation with a particular system window:
In this case a section containing information for operation with the
opened window will be displayed (see Figure 5.12).
Figure 5.12: Help Window (Manual Thruster Section) — Manual Thruster Window

5.4 Position and Heading Display (Map View)

The Map window (Figure 5.13) contains the vessel's position and heading information. The information representation
depends on an active mode.

5.4.1 Vessel heading displaying

Actual Heading Actual heading is shown:
– numerically
– graphically by yellow marker
Numerical indicator and markers are displayed in all control modes.
Heading Setpoint Heading setpoint is shown:
– numerically
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
– open this window;
– open the Help window on the second side of the screen (at the
left/right).
70