Detailed Information For Laser Radar - NAVIS NavDP 4000 Series Operation Manual

Position References
8.8.7.3 HPR Plot
HPR Plot is shown in figure 8.26.
Beacons of the given HPR are shown in this window, which are used as Ref (squares), as Tgt (rhombs) and others
(circles).
Raw data from relative beacons is shown by stars.
Vessel is shown in the same way as it's shown in the map (ship position is calculated with all Ref-sensors), therefore
it can not coincide with the HPR data.
8.8.7.4 HPR Graph
HPR Graph is shown in figure 8.27.
Graphs are shown in this mode: HPR measurements (X and Y).
For more information about view settings for graph refer to Section 5.8, page 81.

8.8.8 Detailed Information for Laser Radar

For each LR "View" / "Param" and "Plot" / "Graph" windows are available.
8.8.8.1 LR View
LR View is shown in figure 8.28.
in window with detailed information a table of ALL transponders of each LR is shown. In the left column for each
beacon softkeys with indicators, raw data are presented.
In the right table column for each beacon the coordinates are indicated in Local N/E.
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
Figure 8.26: HPR Plot
Figure 8.27: HPR Graph
154