Table of Contents
Advertisement
System Hardware Configuration
2.4.18 ALARM LIST
The ALARM LIST pushbutton is to view Alarm List (see Figure 2.13) on the display. Press ALARM
LIST to hide Alarm List view.
To display the entire text of long alarm message press the Enter pushbutton or the knob's pushbutton when the
message is selected. The pop up window with details appears (see Figure 2.16).
To hide the Details window press one of the pushbuttons one more time.
2.5 Control Panel MCP4000-3
The following components of the Control Panel are mounted on an aluminum base plate:
– Rotary Knob;
– PCB with integrated indicators and electronic components.
The arrangement of controls, push buttons and indicators on the control panel is shown in Figure 2.17.
The special transparent film is glued on the aluminum base plate to protect the controls. Buttons' and indicators'
names are printed on the film. Every control is highlighted.
The Alarm Speaker voices every message appearing in the list of the system Alarm Window. Alarm Speaker is
embedded into the system console and connected with the Control Panel by separate cable.
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
Figure 2.15: Modes and Functions
Figure 2.16: Alarm Details
32
Advertisement
Table of Contents
