Dp Windows (Views); Quick Switcher Panel - NAVIS NavDP 4000 Series Operation Manual

POS panel — to select a position control mode. See Section 9.3, page 165 for details.
FUN panel — to select a function. See Section 10, page 171 for details.
TAL panel — to select a TAL mode. See Section 6.3, page 115 for details.
SYS panel — to select window, confirm selected mode/function, acknowledge alarms and silence.

5.2 DP Windows (Views)

Each of the Operator Selected Page is used for displaying one of information windows; each of them is used for
parameters setting and serves a particular purpose. Press the Select window softkey, and the Select Window appears on
the screen (see figure 5.8).
This window contains sofkeys to be pressed if a particular window must be displayed.
The Window List below shows the purpose of each window.
Softkey
Alarm
PARAM
Map
AUTO THR
MAN THR
Power
Sensors
REF
Target
Track
CAP Analysis
CONS Analysis
Help
Trend View
System Monitor
AP
The window content depends on the configuration and options of a system.
The screen always contains two different information windows.
Softkeys with the open windows' titles are white highlighted.

5.2.1 Quick Switcher Panel

Some of information windows are available from the Quick Switcher panel (see Figure 5.10):
– Alarm;
– Map;
– AUTO THR;
– Power;
– Help.
Hold your touch at the top of the screen in area of either status line or alarm/message line until the Quick Switcher
panel will appear (see Figure 5.9).
The Quick Switcher panel contains sofkeys to be pressed if a particular window must be displayed. The panel content
depends on the configuration and options of a system.
Softkey with the open window's title is white highlighted.
67
Window
Alarm Window
Parameter Window
Position and Heading Display
Auto Thruster Window
Manual Thruster Window
Power Monitoring Window
Sensor Window
Reference System Window
Target Window
Track Window
Capability Analysis Window,
Drift Analysis Window
Consequence Analysis Window
Help Window
Trend View Window
System Monitor Window
Autopilot Window
NAVIS NavDP 4000. Operation Manual
Comment
section 4, page 57
section 5.9, page 85
section 5.4, page 70
section 6, page 101
section 6, page 101
section 6.4.4, page 119
section 7, page 126
section 8, page 139
section 10.5, page 180
section 10.6.3, page 190
section 10.8, page 207,
section 10.9, page 218
section 10.10, page 227
section 5.3, page 69
section 5.8, page 81
section 10.12, page 232
section 10.7, page 201
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"