NAVIS NavDP 4000 Series Operation Manual page 158

8.8.9.2 TW Parameters
The window contains the TW location set up (see figure 8.34).
The weight is set in the similar way as the GPS weight.
8.8.9.3 TW Plot
The window contains plot (see figure 8.35) with the following parameters displayed:
– vessel outline
– depressor weight position
– horizontal projection of the wire (from gimbal head to depressor weight)
– boundaries of the zone accessible with the given wire lenght
8.8.9.4 TW Graph
This window displays changes of the selected parameter (outboard angle/ rightward angle/ wire lenght) (see figure
8.36).
To open the settings dialog (see figure 8.37) press on the graph area.
The following keys are used for the parameters:
TW Alpha - outboard angle
157
Figure 8.33: The ATW type view
Figure 8.34: TW Parameters
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
NAVIS NavDP 4000. Operation Manual