Ref-System Softkey And Indicators - NAVIS NavDP 4000 Series Operation Manual

Position References
DGPS Lat, DGPS Lon — DGPS Latitude and Longitude (measurements and processing results);
HPR X, HPR Y — hydroacoustic ref-buoys coordinates (measurements and processing results);
LR Bearing — Laser Radar Range and Bearing, measurements and processing results;
TW Alpha, TW Beta, TW Length — Taut Wire Outboard and Right Angles and Length (measurements and processing
results).

8.8.2 Ref-system Softkey and Indicators

8.8.2.1 Color of the Ref-system Softkey
Light green Selected as Reference. Data from the Ref-system are being used by NAVIS NavDP 4000.
Dark green Data from the Ref-system are coming to NAVIS NavDP 4000; sensor is only monitored.
Red The ref-system fault is detected. It can for instance be if the filter had been receiving incorrect data for a long time,
or there was no data at all, so that NAVIS NavDP 4000 removed the Ref-system from operation. You can press the
sensor softkey to try to put the sensor in operation.
Grey The sensor is not used or used as target or marked as mobile (potential target).
8.8.2.2 Data Filter Indicator
Green The filter is working. Normal operation. Data from the sensor are coming and being processed by the filter.
Grey The filter is not working.
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
Figure 8.9: Ref-system Plot. Processed results
Figure 8.10: Ref-system Graph
146