System Functions
4. To delete selected waypoint press DEL Point softkey (see Figure 10.34).
To select a point, use the arrow softkeys.
5. To edit the strategy of leg passing press Edit Leg softkey (see Figure 10.35).
Set the following parameters for the leg if necessary (see Figure 10.36):
– vessel heading;
– waypoint passing strategy;
– radius;
– vessel speed.
To exit from the RT Edit mode press either Apply softkey if the changes should be applied or Cancel if should not
(see Figure 10.37).
NOTE!
An active route is not allowed to edit in the most of system configura-
tions.
Doc. 000.JDP-10000-OME, rev.3.3.13/"2102.$–17A-Advanced"
Figure 10.35: Edit Leg window
(a) Heading
(b) Radius
Figure 10.36: Parameter Setting for the Custom Leg
(c) Speed
194