Paper Feed Performance In Trays 6 And 7 - Xerox Versant 3100 Press User Manual

Tip
Stock / tray mismatch information and how it is displayed is dependent on the individual
print server. If stock is changed in a tray, a message may not be displayed; therefore it
is important to always perform the following steps before running a print job.
1. Check for a tray mismatch message on the press User Interface. If a mismatch
message is displayed, select it.
A new message displays and explains what media is required and the tray location.
2. Go the print server and check the main / home window for a similar message:
• If a message exists, follow the information provided on the print server to correct
the stock mismatch issue, and continue to the next step.
• If a message does not exist, continue to the next step.
3. Load the stock in the tray.
If the User Interface on the press displays a mismatch message, follow the instructions
provided to load the correct stock.
4. Change the Tray Properties to match the contents of the tray; this is done from the
Stock Library Manager on the print server.
a) Verify the paper size, type (coated, uncoated), and weight of the paper loaded
in the tray.
b) If necessary, enter that information on the Tray Properties window.
5. Ensure that the tray is closed.
6. Ensure that all tray / stock mismatch messages have been resolved.
7. Start your print job.
Paper Feed Performance in Trays 6 and
7
If misregistration / skew occurs on printed output that was fed from Trays 6 or 7, manual
adjustment of the paper-feed levers may improve and correct the printed output.
Important
For most print jobs, these levers should remain in their default position. The position of
these levers should be changed only if there is a skew problem when running a specific
print job and / or media type. Changing the levers may cause more skew problems when
running certain media types such as coated, label, tab stock, hole-punched paper,
transparency, film, postcards, and envelopes.
The paper-feed adjustment levers are found in Trays 6 and 7. These levers are used to
improve paper feed accuracy and to reduce paper skew problems.
® ®
Xerox Versant 3100 Press
User Guide
Paper and Media
5-15