Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual page 74

Basic hardware procedures
Figure 43: Installing the right side of the CMA to the RMK
1 RMK
2 Inner side connector of the CMA
▶ Install the CMA to the rear side of the RMK.
There are two latches for each side of the CMA. One latch is for the
inner side and one latch is for the outer side.
Figure 44: Installing the left side of the CMA
The left side of the CMA is installed in the same way.
74
3
4
Upgrade and Maintenance Manual
Outer side connector of the CMA
Right side: CMA
CX400 M6