Replacing The Power Distribution Board - Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual

▶
"Connecting the power cord" on page
▶
"Switching on the server nodes" on page
▶
"Verifying system information backup or restore" on page
10.5

Replacing the power distribution board

Field Replaceable Unit
(FRU)
Tools: Preliminary and concluding steps: Phillips PH2 / (+) No. 2
hexagonal cross SW5 / PZ2
Main steps: tool-less
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Removing server nodes from the server enclosure" on page
▶
"Removing the defective hot-plug PSU" on page
▶ If applicable, remove the front bezel, see
page 48.
▶
"Extending the server enclosure out of the rack" on page
▶
"Removing the top covers" on page
▶
"Removing the fan module" on page
▶
"Removing the fan cage" on page
Removing the defective PDB kit
▶ Remove the PDB kit, see
page 156.
CX400 M6
84.
41.
54.
147.
120.
"Removing the power distribution board kit" on
Upgrade and Maintenance Manual
Power distribution board
86.
88.
Hardware: 30 minutes
42.
100.
"Removing the front bezel" on
49.
43.
163