Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual page 66

Basic hardware procedures
Figure 31: Fixing the shift bracket
▶ Attach the left and right shift bracket to the rack pillar and secure them with
the studs (1) that are supplied to the shift brackets.
It is also ok to use other screws that are supplied to the shift bracket in
order to attach the shift bracket.
Required tool:
For the stud: Hexagon screw driver SW7, flat-head screw driver.
For the other screws: Phillips PH2 / (+) No. 2 screw driver.
This only applies if the target chassis is not using the CMA.
66 Upgrade and Maintenance Manual CX400 M6